KLA Corporation (KLAC) Q4 2025 Earnings Report, Transcript and Summary

Good afternoon, everyone. My name is Bo, and I will be your conference operator today. At this time, I would like to welcome everyone to the KLA Corporation June Quarter 2025 Earnings Conference Call and Webcast. [Operator Instructions] I would now like to turn the call over to Kevin Kessel, Vice President of Investor Relations and Market Analytics. Please go ahead, sir.

Welcome to the June 2025 quarterly earnings call. I am joined by our CEO, Rick Wallace; and our CFO, Bren Higgins. We will discuss today's results as well as our September quarter outlook released after the market close and available on our website along with supplemental materials. We are presenting today's discussion and metrics on a non-GAAP financial basis unless otherwise specified. All full-year references made refer to calendar years. The earnings materials contain a detailed reconciliation of GAAP to non-GAAP results. KLA's IR website also contains future events, presentations, corporate governance information and links to our SEC filings. Our comments today are subject to risks and uncertainties reflected in the disclosure of risk factors in our SEC filings. Any forward-looking statements, including those we make on the call today, are also subject to those risks, and KLA cannot guarantee those forward-looking statements will come true. Our actual results may differ significantly from those projected in our forward- looking statements. Rick will start with introductory comments on the business environment and our quarter, followed by Bren with financial highlights and our outlook. Now over to Rick.

Thanks, Kevin. I'm going to cover KLA's business highlights for the June 2025 quarter, including commentary on KLA's relevance in the AI infrastructure build-out. For the June quarter, KLA's results were strong across the board, and we were at or above the high end of our guidance ranges. Specifically, revenue was $3.175 billion. Non-GAAP diluted EPS was $9.38, and GAAP diluted EPS was $9.06. We also had record free cash flow of over $1 billion for the quarter. KLA's leadership in process control has put the company in a unique position at the center of enabling success for our customers to build out infrastructure to support artificial intelligence. Prioritized investment to ramp AI capabilities has fueled growth at the leading edge across the semiconductor industry through more complex designs, faster product cycles, higher-value wafers and increased demand for advanced packaging. In DRAM, investments in AI have been focused on high bandwidth memory which demands higher performance, enhanced reliability, reduced redundancy and more sophisticated logic circuitry at base die chips that control the HBM stack. Demand for leading-edge logic, HBM and advanced packaging capabilities were the key contributors to KLA's performance in the June quarter. The importance of process control continues to increase due to semiconductor scaling, new architectures and materials and increasing designs. In particular, process control can improve time to results by debugging process integration challenges in the fab ramp phase and optimizing yield across a high-volume manufacturing environment with high semiconductor device design mix. Additionally, the evolution and complexity of requirements for advanced packaging is creating new opportunities for the value of KLA's process control and process solutions. Finally, this leads to increased relevance for KLA's Service business as KLA systems become more technically complex, are utilized for longer periods in the fab with customers where they're expecting optimal tool performance and availability. To deliver solutions to meet this demand, the company leverages the KLA operating model to focus on prioritizing and productizing new innovations in our product road maps and ensuring that our business operations can scale and execute to capitalize on strong growth and expanded market share in the most critical markets for our customers. To date, we've seen no material changes in customer demands or on announced investment plans. As a result, our WFE assessment for 2025 is consistent with our expectations that were stated last quarter. There are more details about this quarter's highlights in our shareholder letter, but in short, KLA grew revenue 24% year-over-year in the June quarter with sustained strong investment in leading-edge foundry and logic and HBM. This quarter also marked another period of strong momentum for our advanced packaging portfolio. We now expect advanced packaging systems related revenue to exceed $925 million in calendar 2025, up from our previous estimate of $850 million last quarter and over $500 million last year. In Services, our business grew to $703 million in the June quarter, up 5% sequentially and 14% year-over-year. Finally, the June quarter was strong from a cash flow and capital returns perspective. Quarterly free cash flow topped $1 billion for the first time, ending at $1.065 billion. For the last 12 months, free cash flow was $3.75 billion with a free cash flow margin of 31% over the same period. Total capital return in the June quarter was $680 million, comprised of $426 million in share repurchases and $254 million in dividends. Total capital return over the past 12 months was $3.05 billion. KLA's June quarter results reaffirm our leadership in process control and the strength of our broad and differentiated portfolio. They also demonstrate the essential role of KLA's products and services play in supporting semiconductor industry growth. Our consistent execution reflects the resilience of the KLA operating model, the dedication of our global teams and our disciplined capital allocation to invest in our business over the long run and maximize long-term shareholder value. And with that, I'll turn the call over to Bren.

Thanks, Rick. KLA's June quarter results were strong. Revenue was $3.175 billion, above the guidance midpoint of $3.075 billion. Non-GAAP diluted EPS was $9.38, above its guidance range. And GAAP diluted EPS was $9.06, which was at the upper end of the guidance range. At the guided tax rate of 13.5%, non-GAAP diluted earnings per share would have been $9. Gross margin was 63.2%, slightly above the midpoint of guidance as the quarter played out mostly as expected. Operating expenses were $603 million, about $8 million above the guidance midpoint. Operating expenses were comprised of $353 million in R&D and $250 million in SG&A. Operating margin was 44.2%. Other income and expense, net, was a $23 million expense with upside from guidance provided by a favorable mark-to-market adjustment of a strategic supplier investment. The quarterly effective tax rate was 9.9%, well below guidance as various discrete items impacted the quarter's result. Net income was $1.24 billion. GAAP net income was $1.2 billion. Cash flow from operations was $1.16 billion, and free cash flow was $1.06 billion. The breakdown of revenue by reportable segments and end markets in major products and regions can be found within the shareholder letter and slides. Moving to the balance sheet. We ended with $4.5 billion in total cash, cash equivalents and marketable securities, and debt of $5.9 billion. The company has a flexible and attractive bond maturity profile supported by strong investment-grade ratings from all three major rating agencies. The cornerstone of KLA's business is consistent strong free cash flow generation, driven by one of the best operating models in the industry, and a predictable and highly differentiated service business. This helps drive a comprehensive capital return strategy that includes consistent dividend growth and increasing share repurchases over the long term. Our recent actions emphasize our commitment to capital returns and our confidence in the long-term shareholder value accretion of KLA. On April 30, 2025, we announced the 16th consecutive annual dividend increase, which was up 12% to $1.90 per share per quarter or an annualized dividend of $7.60 per share. Along with this action, we also announced a new $5 billion share repurchase authorization. I'll now turn to the outlook. It remains driven by increasing investment in leading-edge logic, high bandwidth memory and advanced packaging. For WFE in 2025, as stated earlier, we are maintaining our original outlook for mid-single-digit growth in WFE from approximately $100 billion in 2024. This growth is expected to be driven principally by increasing investment in both leading-edge foundry/logic and memory to support growing AI and premium mobile demand, partially offset by lower overall demand from China. Given KLA's strong business momentum, expanding market share opportunities, and higher process control intensity at the leading edge across all segments, we remain confident in our ability to outperform the overall WFE market in 2025. Finally, early customer discussions are constructive on expectations for calendar year 2026 to be a growth year for the industry. KLA's unique product portfolio differentiation and value proposition are focused on enabling technology transitions, accelerating process node capacity ramps and ensuring yield entitlement and high-volume production. We continue to be encouraged that our customer discussions on product road maps and capacity planning have remained consistent. In this industry environment, KLA will stay focused on supporting customers, executing product road maps and driving productivity across the enterprise. KLA's September quarter guidance is as follows: Total revenue is expected to be $3.15 billion, plus or minus $150 million. Our quarterly revenue expectation of general stability for the remainder of the calendar year remains consistent with that articulated over the past 2 quarters. Foundry/logic revenue from semiconductor customers is forecasted to be approximately 75% and memory is expected to be approximately 25% of Semi Process Control systems revenue to semiconductor customers. Within memory, DRAM is expected to be about 79% and NAND, the remaining 21%. As always, these business mix approximations are for our semiconductor customers only and do not completely represent our aggregate process control systems revenue. Gross margin is forecasted to be 62%, plus or minus 1 percentage point, reflecting a slightly weaker systems revenue mix expectation and a 50 to 100 basis point impact from announced global tariffs. This tariff impact estimate is below our original estimate of roughly 100 basis point headwind to gross margin that we discussed last quarter. This environment is new to our industry and the long-term tariff situation remains unclear. We continue to assess the impact across our business and identify potential mitigation actions to reduce our exposure to this headwind over time. We will provide periodic updates on our assessment when appropriate. For calendar 2025, based on the results for the June quarter, guidance for the September quarter and our expectations for the business mix across systems and services, including the systems product mix, tariffs and factory utilization, we expect gross margins for calendar '25 to remain approximately 62.5%. Operating expenses are forecasted to be approximately $615 million in the September quarter as we continue to make product development and infrastructure investments to support expected revenue growth. Given our expectations for company growth and product development road map requirements, we will maintain our operating expense trajectory. Our business model is designed to deliver 40% to 50% incremental non-GAAP operating margin leverage on revenue growth over the long run. Other model assumptions include other income and expense, net, of approximately $33 million expense. The non-GAAP effective tax rate assumption for the September quarter and the remainder of the calendar year is 13.5%, lower than the 14% we had previously estimated based on our expectations for the geographic distribution of income. For the September quarter, GAAP diluted EPS is expected to be $8.28, plus or minus $0.77. And non-GAAP diluted EPS of $8.53, plus or minus $0.77. EPS guidance is based on a fully diluted share count of approximately 132.4 million shares. In conclusion, our near-term revenue guidance remains stable, indicating the continuation of current business levels and our customer discussions support this outlook. Based on conversations with customers, we anticipate continued solid growth in calendar 2025. Given the revenue commentary for the remainder of the calendar year, we expect to meaningfully outperform the mid-single- digit WFE growth rate. KLA focuses on delivering a differentiated product portfolio that addresses customer technology road map requirements, which are driving our longer-term relevance and growth expectations. KLA's business is well positioned for the current technology inflections. While we cannot ignore the near-term geopolitical trends, we are encouraged by the customer engagement that informs our business forecast. The long-term secular trends driving semiconductor industry demand and investments in WFE and advanced packaging are compelling and represent a relative performance opportunity for KLA over the next several years. That concludes our prepared remarks. Let's begin the Q&A.

Thanks, Bren. Bo, if you could please queue folks for questions.

[Operator Instructions] We'll go first this afternoon to C.J. Muse of Cantor Fitzgerald.

So I just would love to hit on your comment around early customer discussions constructive for growth in 2026. You work typically from 8-plus month lead times. Obviously, you've got some visibility into '26. So I would love to hear kind of how those conversations are going, and what needs to happen to have firm conviction on growth in '26?

Yes, C.J., thanks for the question. And I think it's a little bit early for us to quantify it. But certainly, we're encouraged by the discussions we're seeing. We think that as you look just across the industry, based on those discussions that we'll see customers investing more. Obviously, what's driving the space today is high-performance compute. And so that part of the market is strong. And we'll have to see how other end markets play out in terms of what that growth looks like. But certainly, at the leading edge, we're encouraged by the activity we're seeing, supported by that market. We're optimistic that we might see some broadening of investment there. DRAM continues to be strong, fueled by HBM. Flash is coming off of low levels, but I think the flash market continues to be constructive moving forward. Overall, legacy seems like it's bottomed. So I think we feel pretty good about where that is. We'll see what growth looks like, but at least in terms of where it's at now. I don't think it's any worse. And then our modeling as it relates to native China activity is that it's likely down somewhere in that -- we'll see how far down, but I think it's down after a couple of years of pretty elevated investment in '23 and '24. So if you think that '25 is down and we think '26 is -- probably has some headwinds as well as that normalizes, given most of the focus there is on legacy.

C.J., just to add, as we see the continued investment in the advanced logic, as Bren mentioned, we see momentum as more and more players are bringing their designs. So you think about the sustained investment in advanced logic and then even some investment going back a node. So we're also seeing some additional -- so we feel really good about logic/foundry in terms of that overall momentum plus the packaging momentum we've talked about.

Very helpful. I guess on the domestic China front, you talked early indication of lower again in '26. Curious, as three regions, Wuhan, Shanghai, Beijing are competing for supremacy, and we've now gone from four to six large kind of players, how does that kind of inform your view? Does it give you a sense that things would only decline a little or a lot? Or just too early to tell?

Yes. I think it's too early to tell at this point. As I said, we had 2 years of a lot of backlog we had to ship through and work off, which we have done. And I think now that we're seeing investment from our other customers, we're seeing that drive our business outlook more strongly here moving forward. So we'll have to see as we move forward here. But my sense just in terms of looking at it bottoms up and trying to reconcile with some of the some of the top-down kind of market outlook information, I feel like it's probably got some headwinds to it in terms of the investment levels relative to '25.

We'll go next now to Harlan Sur of JPMorgan.

Great job on the quarterly execution, guys. Year-to-date, so March and June, your Process Control Systems business, right, that's inspection and patterning, that's up 35% year-over-year. So it looks like you guys are setting up for another strong year of growth and maybe even more share gains, right? But within that, inspection is up 50% year-to-date, while patterning is kind of flattish, kind of similar to the profile in calendar '24, where inspection drove most of the growth. So maybe you can just help us understand, a, the drivers of the massive strength in the inspection, is it broad-based? Is it across optical, darkfield, bare wafer, e-beam? And then maybe help us understand the relatively flattish growth in patterning. And do you guys anticipate another year of total share gains in process control?

Harlan, thanks for the comments. A lot there. I'll try to unpack it a bit. I mean, certainly, we've seen a strong inflection in our optical pattern inspection business. We were supply constrained in that business for some time. Now we have more supply, and so we're shipping through a lot of backlog for that product, and that product is well positioned and really critical for gate-all-around. So that's been a nice driver. Obviously, what's happened in packaging has also been a nice driver for this part of the business, sampling rates and inspection given the challenges are very, very high, and so that's been a nice tailwind for that part of the business as well. So inspection has definitely been inflecting. As it relates to patterning, you have really three businesses there in patterning. You have optical metrology, which is around overlay and then you also have film measurement, reticle inspection. And with overlay, as we've seen some slowdown in advanced litho with -- from a customer point of view, there's an attach rate of that business to litho. And so that's reduced, I'd call it more really nonconsumption in that business. So that's been a little bit weaker. It's really the only business we have that has an attach to litho generally. Film measurement, I think it's a little bit lumpy, would expect better-than-market growth out of that business as we go through the year for 2025. And for reticle inspection, it's a lumpy business, we have some large integers in there but would expect to see that business grow meaningfully and at a record level for calendar '25 versus '24. So a little bit of just what happens in the quarter, but I think from a directional point of view, I think we'll see stronger patterning as we move through the second half of the year.

Yes. And Harlan, to your point, I think overall, we are seeing process control intensity continue to rise for all the reasons we've talked about, the advanced designs, large die. And so initially, at least a lot of that favors inspection and Bren talked about some of this -- the facts in patterning. And then the reticle comes around. I mean, for KLA, reticle in 2025 is going to be a record year. So we feel good about where we are positioned there and we have more products coming along. So we feel process control intensity continues to strengthen, and our market position is very strong.

Very insightful. And yet again, you guys upped your target for advanced packaging revenues from $850 million to now $925 million for calendar '25. That's up like 80% year-over-year. I assume it's a combination of HBM and 2.5D and 3.5D advanced packaging. We know that many of next-generation 2-nanometer AI GPU, XPU designs are targeted for this kind of 3.5D packaging architecture stack chips, more HBM stacks. Just overall significantly more complex versus 2.5D. But maybe you guys can just help us understand where are you guys seeing the incremental upside? I think this is like the third or fourth time that you revised your full year outlook for advanced packaging. So where are you guys seeing the incremental upside?

So Harlan, you touched on a lot of it. And I think it's a combination of -- it took us a little while to have the products that were requested. And so a little bit of that is adoption and then some momentum once we started getting going. And then just the ramp is -- it all comes back to the build-out associated with the AI infrastructure. And for us, that's the third leg. We talked about logic/foundry, advanced designs, bigger die, talked about HBM and talk about packaging. And really, it's that part of packaging. And I think as our customers see success with our portfolio, we're gaining share. So the exciting part for us is apart from WFE dynamics, which I think we do spend an awful lot of time about, this is really outside of WFE. So we're seeing growth in packaging as a sector for inspection, metrology. Also, our process position there is good. And then we're gaining share. So you have a really nice combination. And when we talk to customers, we think we're closer to at the beginning of this trend than at the end of it. We think this is -- there's a lot of growth to come.

Yes, Harlan, the other thing I'd say is just if you just go back just a short period of time, just go back a few years to 2022 as a percent of advanced packaging, our Semi Process Control business. Given the nature of the requirements was pretty low, we were probably about a 1% intensity. Today, we're sitting somewhere around in that 5% to 6% range. So just in a few years, we've seen our position change quite dramatically as the requirements, to Rick's point, have increased. So we're pretty excited about the growth rate and opportunity there. And we think that this continues to be a growth area as we move into next year.

We'll go next now to Vivek Arya of Bank of America.

On the first one, the process control intensity in memory, I wanted to get your views on this. Historically, it used to be low, closer to, I think, mature nodes. How is that process control intensity evolving as the industry is moving from traditional DDR DRAM to more high-bandwidth memory. Is there a way to quantify what the benefits are to KLA because HBM is expected to be one of the fastest growth drivers in AI accelerators. So I'm just curious to understand how your opportunity is evolving as the industry migrates to HBM and then advanced versions of HBM?

Yes. So I'll give you a qualitative and Bren can do the harder thing of giving you more quantitative. Qualitatively, you have more advanced, bigger, more valuable die with more challenging circuitry in the periphery and less redundancy. So -- and you have a tremendous pressure coming because these are in high use and therefore, these die don't rust. These are unlike -- the duty cycle is high. So you've got -- and they're part of an expensive system. So what our customers have said is they increased -- and as you know, there's multiple players, they've increased the inspection, both in the development but also in the build-out. And they're finding that they need everything they can get as to insight. And because these are more valuable die with less redundancy, the defectivity levels in the past that might have been acceptable, are not and so not acceptable now. So they need more coverage. They need higher tools, plus they're introducing new technology. So everything is driving toward higher process control intensity. We've been -- I don't know that we've been surprised, but we've been pleased by the adoption, and we think there's more demand coming as people understand the challenges. And then they're on a road map cadence that's different than the consumer cadence was. So I think from their standpoint, they're under a lot of pressure to deliver that yield. So that's what's happening and why this adoption is very different than memory has been in years for us.

So when DRAM went to EUV, we started to pattern a couple of layers or a few layers with EUV, we saw a step-up in intensity. So process control intensity was somewhere around 9% to 10% of WFE back before. And then with the introduction of EUV, we saw that improve. We saw that improve about 100 basis points. When we move to HBM, we think that there's another 100 basis points or so of opportunity there. We'll see how that plays out over time. But as Rick said, as the requirements have changed, it's increased the value of our products and changed how customers sample and their expectations around reliability. You also have a bigger die, which benefits everyone, but I think some of these challenges that they have around the market requirements for HBM are benefiting process control uniquely. And so we're seeing that on the logic side, but we're also seeing that on the memory side as well. So right now, when we look at it, we think there's probably another incremental 100 bps on top of that. So if you go back pre-EUV to where we are today, it's probably somewhere in the neighborhood of 200 basis points of higher process control intensity. And our share position and momentum is in a pretty good place. So we're encouraged by what we're seeing.

All right. Very helpful. And then for my follow-up on gross margins, kind of near and a little more medium term. So if let's say, December quarter sales are flattish, should we assume gross margins stay flattish? Or are there any other mix effects, et cetera, that we should keep in mind? And then kind of more medium term, what are you doing to mitigate that tariff cost pressure? Can it be mitigated? Like when should we assume that you have some alternatives in place to get the gross margins back to the trend line?

Yes. So the first part of your question, we talked about our views of calendar '25 gross margin at 62.5%. So if you take Q1 and Q2, and our guidance for Q3, that will lead you to an uptick in gross margin in the fourth quarter based on our expectations now around revenue mix as it looks next quarter. So that should get you there. You can do the math and figure out how to get there. But as it relates to tariffs, there's a lot. I mean, first of all, as I said in the prepared remarks, it's a new thing for our industry. It hasn't been a factor in our business operations historically. So now as we face the likelihood of higher structural tariffs moving forward, there are some business processes as it relates to how we move parts around, how do we leverage free trade zones and things like that to reduce leakage of tariffs as it -- where you pay a tariff, but then you have an opportunity when you turn around to export where you can reclaim or clawback the tariff that you pay related to the export. So there are a lot of those dynamics that are mitigating factors. Obviously, if it drives structural cost increase, then that's something that we'll have to deal with both in our service and system businesses over time, just like we would with any other cost increase. But we think that there's some opportunities to go do some things on the process side, where, look, we got a lot to do. The ROI wasn't all that compelling even though it might have been a better process, well, if you add in the economic cost of incremental tariffs, all of a sudden, some of those issues rise up or opportunities rise up the priority scale. So that's really how we're thinking about it. I think for the Street in terms of how you're modeling KLA, I think that the 50 to 100 basis point guidance headwind is probably the way to think about it. And then as I start to see either some stability or some changes in terms of how we're doing things that reduce that, I'll provide that update when appropriate.

We'll go next now to Shane Brett of Morgan Stanley.

Apologies for asking a bit of a near-term question. But if I'm understanding this correctly, your September quarter foundry/logic revenue is likely to strengthen sequentially, but your memory revenue across both DRAM and NAND will decline. I thought that the memory mix, specifically DRAM, may uptick a bit more in the second half. So just talk about the big business mix here and if we could see a memory uptick in the December quarter?

Yes, the way it's lining up, I think that we'll see DRAM stronger in the December quarter than the September quarter. It's just really about timing of revenue, revenue recognition, those dynamics. There's shipments, but there's final product acceptance processes that we run through that drive revenue into a particular quarter. But as I look at it and you think about some of the project timing that's out there, I would expect to see an uptick into the December quarter.

Got it. And for my follow-up, so 2022 Analyst Day, you set out a $14 billion revenue target for '26, which I think was based on $125 billion WFE assumption. I think your market share gains have clearly checked above what you were probably thinking in 2022. Just could you talk about those market share gains and sort of where your kind of current assumptions are towards -- as we think towards 2026? Not really asking for a revenue guide, but if you can kind of give us a few crumbs on how to think about '26.

Well, you're right, the 2026 plan assumed a WFE level in the mid-$120 billion range. And so we'll see whether we get there or not. But I would say that for KLA, we don't need $125 billion to make that plan, given the strength that we've seen in our share of WFE, the growth rates we've seen in packaging. Obviously, we've had some headwinds as it relates to export control in terms of lost opportunity, but also how that's affected our service business. But in general, we feel like we're pretty well positioned from a share of WFE point of view. We assumed a 7.25% share of WFE. If you take out packaging, I think our share of WFE is approaching 8%, then you add in the packaging opportunity. So we'll see. If I got WFE levels in the mid-teens, I think we got a shot at it. But I think when you consider puts and takes, we don't need as much given the growth rates we've seen in our overall share of market. Now that's been intensity driven. I mentioned packaging. We're also, I think, pretty confident around some of the share opportunities we also have. That's -- all that's part of that number. The financial model underneath is operating very consistent. Absent the tariff effect, we'd probably be in line or maybe even slightly better on the gross margin side at that revenue level. So the rest of it is driven by our incremental operating margin model and our expectation of drop-through to EPS based on business performance, but also capital structure action of EPS growth of 1.5x our revenue growth rate. So it really is going to be predicated on where WFE ends up in terms of how we perform against that target. But the financial framework is executing as we expected.

We'll go next now to Charles Shi of Needham.

Maybe my first question, a little bit more about China. China as a percentage of sales, 26% in March, 30% in Q2. So is the 30% still the right number kind of going into the second half of the year? Or shall we kind of expect some upside? Because the data point so far have suggested there has been some upside in China WFE so far. But I kind of wonder, since you still view China WFE is coming down this year, kind of -- I want to get some thoughts there.

Yes, Charles, I'll try to unpack this a little bit. If you go back to earnings in January, we talked about our China business dropping to the 30% level assuming a $3-ish billion run rate, and that's down from about 41% in 2024. So obviously, Q1 was lower, which means that you're likely to see higher percentages as you move forward. So our -- we fast forward to April and the guidance in April was very consistent with that. If you look at where we sit today, I still see it at roughly 30% plus or minus. Now the second half will be higher than the first half because you were 26% and 30% in Q2. So I think the second half is higher than the first half. But for the company overall, we're still in line with that 30% expectation plus or minus a couple of points. Now our business has strengthened. We were a $3 billion run rate. Now we just guided $31.5 billion. So some of that strength has been reflected in China at a consistent percentage. So at the beginning of the year, we thought our China business would be down somewhere between 15% and 20% overall. As I sit today, I think we're probably down somewhere between 10% and 15% on just the general strengthening overall. So China behaving pretty much as expected and expect the year to end up somewhere around 30%.

I appreciate the color. Maybe another relatively high-level question. I listened to your answers to questions from other analysts on this call regarding process control intensity. I think historically, people kind of associate or positively correlate process control intensity with lithography intensity. I think lots of discussion on litho intensity this year, feels like the consensus is probably coming down, but I think that historical correlation kind of broken down over the past couple of years, process control intensity actually was on the way up. Litho probably kind of coming down as we remove any of the stockpiling in China, those kind of factors. So kind of wanted to get the sense from you guys, what do you see that the process control intensity? Why is that correlation breaking down? And what's the outlook going forward from here? Do you expect that the bifurcation is kind of going to be sustaining structure or maybe we'll get a mean reversion event at some point in -- down the road?

Yes. That's an insightful question. The -- if you go back in time, and I won't go too far back, but often the process control for lithography was associated with wavelength shifts in lithography, usually driven by one large manufacturer of a microprocessor. And so that was the cadence that kind of set everything. And so in those cases, you'd be going to a new design rule and you'd need new lithography, maybe the mix was different with advanced. And so you'd see intensity go up and those same drivers would be driving process control intensity to your point. What's changed quite a bit is the dynamics associated, and it started happening a few nodes ago, where we saw a proliferation in advanced designs at leading edge. Because historically, what you also saw was fewer people designing at the leading edge. So therefore, it was pretty correlated. But around 7 nanometers, we started seeing more designs happening. And the design intensity around the number of designs chasing leading edge doesn't really do anything for lithography intensity. In fact, it doesn't do anything for much capital intensity, except for process control intensity because you have a higher degree of variability because you have more designs going through at the leading edge. You drive reticle consumption up higher, and that has been a very stable market. But more importantly, you have a very high mix fab where the variability is more and more challenged. And then you have to manage that in terms of how do you make sure you're yielding enough and not putting too many wafers in, that's all about process control. That's not about other things, not about litho. And then add to that, the latest thing that's accelerated even further is the number of large die and associated with AI. So you have yet another driver that's doing it. On top of all that, you have what's going on in advanced packaging, which is allowing people to integrate a lot and, in many ways, reduces the need for other equipment but increases the need for process control. Lastly, you have what's going on in HBM. So it's kind of a perfect transition from a -- if your business is process control, this is a really good time because every one of these drivers is driving the intensity in the way that customers can afford to have more process control is they don't need as much intensity in their other parts of semiconductor manufacturing. So you're exactly right, but it's really the proliferation of design and the drivers around AI.

We'll go next now to Tom O'Malley with Barclays.

When you answered the question earlier in the call on 2026, and I appreciate it's early, and you don't want to give more color, you talked about the broadening of leading edge, and I think you were very intentional around using that word. Are you talking about additional customers coming in on the leading-edge side? Or are you just talking about the broadening of opportunities in the existing pillars of customers that you already have?

Both, talking about both. We're seeing more people at the leading edge, as we've talked about, higher mix foundries. And for the first time, I think, in quite a while, we're seeing more players doing leading edge or very close in proximity to leading edge across. So we're seeing some momentum there. Some of that's been in the news. And as a result, what we're seeing is a broadening of customers as well as a proliferation of design. And I think it is the proliferation of design that is driving the broadening of customers.

And when you guys look out into '26, you obviously are also thinking -- look at the environment you just described, you talked about a lot of different areas in which process control is going to do a lot better than other areas of equipment. How are you comfortable in talking about the strength of the broader market where you're kind of describing a dynamic where maybe you're taking more of the pie and obviously, having more of the pie, the market may look a lot bigger. So maybe can you walk us through like what you're doing to understand what your intensity is of total WFE next year? Do you see share gains and maybe the market isn't as big, but you maybe have a piece of that market that's a little bit larger. How do you kind of figure that out as you look at your forecast into next year?

Well, I'll take the qualitative, and let -- Bren wants to do the quantitative part. We don't actually know exactly, what we know or what the trends are happening, and there's always been this thing about process control that kind of cuts both ways. One, is can you solve these problems? And if you could, you -- people would buy systems to do it. But for a long time, there were a lot of unmet needs. And so people would find other ways to solve those problems because eventually, they're going to figure it out. And what I mean by that, let's say, you need to find a specific defect in a specific part of the process, you need to segment that process to find it. Well, if you don't have the tools that are actually capable of doing that, customers will figure out another way around it, maybe not nearly as efficient. But so part of what's changed is we have more of those tools and part of what -- the reason we have that is our portfolio has been strengthened through a lot of investment over the years. And we talked about quite a while ago, the repeated application of advanced processing of our own systems using AI has given us more ability to solve those problems in conjunction with some new product offerings such as our e-beam portfolio means that we can give customers a better way to manage those. So from the standpoint of that, but I don't actually think in some customers, they are figuring out dynamically how much process control they need, and it's still incumbent on us to prove the value when they introduce it. But when we say we're pretty confident going into '26, it's because we have more and more places where customers are telling us, in some regards, they're playing back to us what we may have said to them a while ago, we know we need more process control intensity, we need you to help us get that portfolio. And they're making sure that we have the ability to do that. Those are encouraging conversations that we're having now. And we understand why because we're involved in a lot of the debugging of these processes to understand. You also have architectural changes that are just making it harder. And so the dynamics of supporting these advanced nodes, and as I mentioned before, we're in kind of the perfect storm for all the process flows, whether it's HBM and those are more challenging, whether it's advanced logic with bigger die and also the packaging. So that's why we feel pretty good about '26. And Bren can maybe add more color.

Yes. Look, we all know our own businesses probably best. So when we try to provide some color on where the industry is, obviously, that's informed by what you know and are closest to. So we thought that it was prudent at this point given the nature of customer conversations to provide our perspective next year, the way we did. To Rick's point, we do see opportunities for our business to continue to inflect. One thing about larger die is it creates this defect density challenge where everybody benefits from bigger wafers, but the defect density challenges when you have large die creates new opportunities for process control. When you look at high-performance compute, you also look at the value of those die. And so that, given the nature of that, customers are investing more to ensure that those chips function as designed, and the performance specs are quite rigorous. So all that gives us a certain amount of confidence around our own business, and I tried to do my best to give you at least the perspective that I have today in -- at the end of July or what next year -- what we think next year looks like.

We'll go next now to Joe Quatrochi of Wells Fargo.

Yes. Maybe just a follow-up to that kind of line of questioning. If we think about just -- you talked about the rising and diversity designs of starts in HPC increasing KLA's relevancy. I guess, how do you think about just the sample rates or what that does to sample rates for process control? Do we just think about that as being maybe the peak to trough is less steep on a new node ramping? Or is this kind of a step function higher in terms of sample rates?

Yes. This is another interesting development, Joe. And I'll -- because we have that same question, if you go back historically, you'd have a new node, you would ramp at the beginning of time, you'd ramp it up and then you run it in volume. And so you see process control intensity most -- highest at the front end, right? That's what you're referring to. What's happened now, though, is because there are multiple designs, what we're seeing is they'll debug -- the customer will debug a new process on a specific device type, a specific wafer and they'll ramp that. But not long after, you'll get other designs that are coming in that have their own version of those ramps, and they're not the same. And in many cases, the process flows for different customers are different. The die size might be different. So you're really having a compounding of ramps inside what looks like HBM and a lot of these HBM fabs are actually doing process ramps of the new nodes, plus there are continued improvements inside of that node in terms of what -- that capability. And even to one degree, we saw somebody go back to a prior node and introduce more process control because what was introduced into that prior node was a larger die. And so it's not the traditional model people think of when you go back in time of you ramp it and then you run it. That's not what's happening. There's multiple ramps because every one of these die, these devices come in. There's some benefit to some customers to not be first with their advanced design. In fact, there's an economic benefit to coming in 6 months later, but it doesn't make it easier to ramp it in the production. So that's why when we look out and we look at the distribution and we were looking for -- are we seeing that effect of seeing it front- end loaded? And the answer is no. That's not what we're seeing. In fact, in some cases, we're seeing it going back because the yield -- these wafers are so valuable that if there's an entitlement of yield and they can get more, they're actually putting in more process control to squeeze those lines to get more capability. So very different than the traditional view of how process control ramps with the new technology node.

Joe, the other thing is that when these nodes are well adopted. So the design levels are high, then that limits what our customers are able to do in terms of trying to reuse their equipment at least as it relates to our products. And so as we've had a litho road map, we've had new architectures, the Moore's Law attributes have been good that drive the design environment high, then it limits the reuse of capacity. There's a number of technical challenges that also limit it, but certainly, the adoption levels of the leading edge by multiple designs is a factor as well.

And let me add two more things. Because you have multiple reticles, reticles have always been 100%, right? You're inspecting all the reticles to make sure, and then you have a [ re-qual, ] but you're inspecting them to make sure they're good. And why? Because they're so expensive and the cost of failure is so high. We're actually seeing that dynamic in packaging, too. Because the cost of these advanced packages are so high that they're running at 100%. So that doesn't even fall off. That's just because of the cost structure of those. So multiple situations, it's not as easy to model as it used to be, but it's good for process control intensity.

That's super helpful. And maybe just as a follow-up, I think earlier to a question, you said -- and correct me if I'm wrong, but you said reticle revenue -- reticle inspection revenue this year would be a record or pretty strong growth. Can you help us just understand like what's driving that? I know that like China had been a source of demand for that, but I think there's also quite a bit of demand on leading edge or in minus 1 nodes.

Yes, Joe. So China is a factor there, right? Because the very limited number of captive mask shops, so investments to develop a merchant mask ecosystem. So there is legacy node reticle tools that are continuing to be a factor for us. Requalification opportunities in the fab given the nature of the number of designs, the value that Rick talked about, and the limited use of pellicles is also a factor. The other thing that you have that's also driving it is more single die. Since most of the reticles, let's say, 60% plus of reticles are single-die reticles, you need to inspect those reticles against a reference. And so whether that is a database reference of the design, whether that's a different -- a golden reference, then that's also a factor. We're also seeing benefit in terms of print check on the broadband plasma Gen 4 platform -- or Gen 5, that one is in Gen 5 platform. That is doing reticle qual as well. And that business shows up in our in our optical inspection results and not in patterning. But there's a number of drivers and a ton of investment happening by customers to ensure that these reticles are -- the fidelity of the pattern is good and that they're not introducing any defectivity because you need 100% defect detection and reticle inspection or you print that defect onto every die. So a number of good drivers across multiple products.

But just to point out, what Bren talked about using optical for print check, that is not included when we say we're having a record year in reticle, but it's without that.

We'll go next now to Timothy Arcuri of UBS.

Bren, can you -- I know you're going to shift how you report backlog and RPO, but I think that's maybe with the new fiscal year. So can you give us RPO?

Yes. So we'll report in the 10-K, I think we're going to file it here in another week or so. RPO will be somewhere around in the neighborhood of $7.9 billion.

So it came down by like $1 billion?

Came down by about that much, yes. We're starting to see, as we said earlier, as we've shipped through a lot of the long backlog customers now and some of the supply-constrained products, we're now seeing our business being driven by our long-standing customers that operate with shorter lead times. So now we're normalizing lead time. We've been talking about it for a number of quarters that we were moving towards it. I think now we're getting into that range where, look, our long-standing customers have historically 6- to 8-month lead times, the packaging business has 2- to 3-month lead times. So we're seeing a normalization of lead time that's happening here, and that's affecting the backlog level. It took a while to get here. We were up at, what, 18 months of backlog. Now we're down around 8 months of backlog. You have to remember, the RPO number is significantly a systems number. So when you do the math on it, you have to compare it against the systems revenue. And so when you do that math, you end up in that 7- to 9-month range that I talked about.

Yes. I mean, we've been talking about that for a while that it's going to come down. But so was the $1 billion that was stripped out by you. So basically, that's canceled by you.

No, no, no. That was part of our shipments. I mean we don't really see our backlog cancel all that much. I mean we had to strip out backlog as it relates to export controls when that happened. But whenever we make adjustments that are debooking adjustments, those are typically related to an event like that. Our backlog tends to [indiscernible] together when customer gives us an order. And you have to remember, we had a number of new customers that were doing greenfield projects that to get a slot when you want it, what do we require? We require an order, we require a deposit, we require letters of credit. So that was a big part of the backlog. Now you fast forward to where we are today and you look at our long-standing customers that you know well, well, those customers, we build the forecast with. And so the order to shipment timing tends to be in that 6- to 8-month time frame. So we're seeing more of that business going forward, and that's reflected in the lower backlog levels. I would expect, now we've normalized, it to stay more or less in this range here going forward.

And just on service, you were thinking up 10% for the year, but you seem to be running ahead of that? It seems like maybe up like low teens this year. Can you talk about that in service?

For the -- I'm sorry, Tim, you're breaking up a little bit. Service. Yes, overall service. I think we're in that ballpark. Yes, 10% plus range for the year.

Okay. So -- but it's still going to go up sequentially in September and December, right?

Yes. It generally does, right? I think because as you add tools and tools come off of warranty, unless you have some situation where all of a sudden like you lose access to a fab, and we thought that might put some pressure on sequential growth. But we've also seen the dynamics in our service business start to inflect in terms of performance requirements, availability requirements and our general attach rate. So it's the 52nd quarter of year-over-year growth for service and we'd expect to see sequential growth in service as we continue through the year.

And ladies and gentlemen, we do have time for one more question this evening. We'll take that now from Brian Chin of Stifel.

I think one of my questions has kind of been asked here, which you remarked on pretty well, which is basically that these data center chips are kind of breathing life into minus 1 nodes, it sounds like. I think that's something that's pretty important to say. Maybe one last -- my question will be, I could be mistaken, but I think when you discussed in the past, it felt like your near-term opportunity set in advanced packaging was particularly in 2.5D or CoWoS packaging rather than in HBM. Is that the case? And where is more of the -- is that the case, I guess? And also, are you addressing more inspection applications still? Or is metrology part of that as well?

Yes, most of our share gains that we've seen so far have been in the logic area with CoWoS, although we are seeing increased momentum in HBM. So we're pretty excited about directionally where that's going. So it certainly is informing our view of share opportunities. It is more defect loaded than metrology because sampling rates for metrology tend to be a little bit lower as the design rules that are typically used in packaging are larger. And so that limits some of the metrology opportunities in the short run. But from an inspection point of view to Rick's earlier point, the sampling rates are incredibly high because you don't want to miss defects, you don't want to overkill devices either. So you don't want to under-kill and miss something, you don't want to oversell either. And I think so that's driving higher sensitivity requirements from KLA.

And at this time, Mr. Kessel, I'd like to turn things back to you, sir, for any closing comments.

Just thank you, everybody, for your time, for your interest in KLA. We appreciate it. We know it's a busy week of earnings, a busy day. We'll be in touch as we go forward. Thank you. Bye-bye.