Good day and thank you for standing by. Welcome to the Fourth Quarter 2022 Sarcos Technology and Robotics Corporation Earnings Conference Call. At this time, all participants are in a listen-only mode. After the speakers’ presentation, there will be a question-and-answer session. [Operator Instructions] Please be advised that today's conference is being recorded. I would now like to hand the conference over to your speaker today, Maria Shelton from Financial Profiles.

Thank you, operator. Good afternoon everyone, and welcome to the Sarcos Technology and Robotics Corporation fourth quarter and full year 2022 earnings call. Joining us on the call this afternoon are Sarcos President and Chief Executive Officer, Kiva Allgood; and Chief Financial Officer, Drew Hamer. Kiva will start the call with a discussion of business highlights from 2022 and recent events, and Drew will then talk in more detail about the financial results before management takes questions from analysts. Before we begin, we must state that today's call will contain forward-looking statements including statements concerning future commercial production and availability of our products, product features and capabilities, target markets and market trends, size and expectations, customer demand and future financial results, condition and cash flows including revenues, costs, and liquidity. In addition, any statements about future performance related to our acquisition of RE2, including our expectations regarding the benefits to be achieved, the financial performance of the combined company, integration plans and other statements regarding the combination of the two companies are forward-looking statements. These statements represent management's beliefs and expectations as to future events of today, but there are many risks and uncertainties that could cause actual results to differ from what we have projected. Among those risks and uncertainties are those described in our annual report on Form 10-K filed today with the SEC and those mentioned in today's earnings press release. We encourage you to review the risks and uncertainties described in this press release and in our filings with the SEC for further information regarding these actual and potential risks and uncertainties. We also encourage you to review the special notes regarding forward-looking statements including in our earnings release and 10-K for the full year 2022 filed with the SEC this afternoon in which we posted in Investors section of our website at sarcos.com and on the SEC's website. In addition, we'll be discussing certain non-GAAP financial measures on our call today. Throughout this call, all financial measures will be GAAP, unless otherwise noted. A reconciliation of any non-GAAP measures to the most directly comparable GAAP measures, as well as the description, limitations and rationale for such measures are included in the earnings release filed with the SEC this afternoon and which is available on our website and on the SEC's website. A recording of this call will also be available on our website until April 16, 2023. The information that we're giving on this call today is as of today's date and we undertake no obligation to update the information subsequently. At this point, I'd like to turn the call over to Kiva Allgood, President and CEO of Sarcos.

Thanks, Maria. Good afternoon and welcome to everyone joining us on the call today. As you saw on our press release earlier, we had a strong fourth quarter and full year with revenue coming in on the high end of our guidance range. In addition, increasing revenue, it was a productive year and a giant leap forward. Sarcos is a recognized technology and software company developing the latest innovations in robotics and software technologies, and the RE2 acquisition we made in 2022 is playing a key role in that recognition. By combining our two companies, Sarcos now able to offer a much wider range of robotics systems and solutions to meet our customers' needs and expanded even more industries. Most importantly, we gained the RE2 team and their deep expertise in robotics, machine learning and AI. We have integrated RE2, Sapien products into our portfolio and incorporated them into our Guardian product lineup, which now encompasses the Guardian XM, intelligent robotics system, the Guardian Sea Class robotic system, and the Guardian XT Dexterous robotic system. We are commercializing these systems, first because of the expected strong demand that the products are capable of real world use, and we're managing supply chain risks associated with these products. Although, we continue to develop the Guardian XM, we don't believe production of the initial commercial version will be ready until sometime after 2023. We have a customer pipeline that is ready now for the XM, XT and Sea Class and we see the powering utilities, aviation, defense, maritime and construction industries as the end markets where our technologies can make the biggest fastest impact. We're seeing a strong customer preference to buy our systems outright rather than lease them in a robotic as a service model. We're also seeing strong customer demand in…

Thank you, Kiva, to everyone on the line, it is a pleasure to be here today speaking with you. Please note that our results for this year include the financial performance of RE2 from the close of the transaction last year on April 25. The 2021 results do not include results from RE2. Also, please note what was formally called research and development services revenue is now called product development contract revenue. Product development contract revenue comes from different types of contractual research and development agreements, primarily related to the development and commercialization of our products, including cost type and fixed price agreements. Now turning to the actual results, all comparisons I will use are year-over-year. For the fourth quarter of 2022, revenue was $6.1 million compared to $1 million during the fourth quarter of 2021. The increase was primarily due to increased revenue from product development contract revenues, cost of revenue increased by $3.3 million to $4.4 million as compared to $1.1 million in 2021, mainly due to the cost associated with the product development contracts I just mentioned. Fourth quarter 2022, total operating expenses, including cost of revenues were $101.3 million, an increase from the fourth quarter of 2021, operating expenses of $28.6 million. The increase was mainly due to a non-cash goodwill impairment charge of $70.2 million, which was primarily driven by the sustained decrease in the company's publicly quoted share price and market capitalization during the fourth quarter. Research and development expenses increased by $4.1 million to $10.2 million in the fourth quarter, this increase was driven primarily by increased headcount from the acquisition of RE2. Part of this increase was also related to increased third-party service provider costs focused on the development of our Guardian XT, Guardian XM, and Guardian XO products. General and administrative…

Thank you. [Operator Instructions] Our first question comes from Rob Mason with Baird. You may proceed.

Yes. Good afternoon. Kiva.

Hi Rob.

My question starting out, just can you just walk through what the gating factors are before we start to recognize commercial revenue, know starting from now until, I guess mid-year? What else needs to happen along the two products that would be most likely to recognize revenue?

Yes, great question. So actually – hopefully you saw our announcement, we've got three products that we're really focused on, the Sea Class, the XM and the XT. Sea Class has been in field and underwater for over two years and highly tested and is in production now, so very excited there. On XT, XM, we also produce a good 10 units of the XM at the end of last year, and XT is in production right now. I had a chance to go down and check out the new face and smile. So it's coming to life as we speak. As far as gating factors, again, continues to spend money to get the long lead items in time. We still have some pieces and parts that are 42 to 52 weeks, but again, I think the supply chain team did a fantastic job of purchasing those long lead items that also shows up on the balance sheet from last year. So I think from my perspective right now it's just pencils down and moving forward.

And then we'll continue to ramp that production, Rob, so that we can get to the volume units to be able to sell them. However, they're available now for our sales force to go out and start negotiating with customers and closing contracts.

That was maybe my next question is, I take it you are open now, the order book is now open, you're taking orders or your ability to take orders is here.

That's correct.

Key milestone for us is these units are – could be produced in ever increasing volumes now.

Very good. And it's good to see that you've got the contract manufacturer arrangement lined up. How do you see that playing out here over the next year or two? Is it should I think that there will be sub-assemblies and both sub-assemblies, I guess and final assembly at the contract manufacturer. But I'm just – just maybe speak to the interplay between your own capabilities and the contract manufacturer over the next year or two?

Yes, so there are two stages to this. I'll start and then Kiva can finish on this, but the first stage as we go, as we start to ramp manufacturing this year is that they are working with us in understanding how we manufacture our products. However, we're still doing end-to-end manufacturing as we refine the process. And then as the year progresses and volumes start to increase, then we can transfer some of the sub-assemblies to them. We will always do sub-assembly, we'll do final assembly test, packaging and shipping from here. But by moving the sub-assembly work to them, that'll offset a bunch of the work that needs to be done to produce the units. And then as we get further out a couple years, then we can start talking about having them do everything. So it's just a natural phasing stage that takes place in transferring things to your contract manufacturer. Mostly this year though, we'll be doing most of the manufacturing and towards the end of the year we can start to explore having them do some of that sub-assembly and ramping that up in 2024.

Nothing more to be said.

Very good. Maybe just one last question, I'll jump back in the queue, can you give us any initial thoughts for the second half of the year as we do start the scale deployments, how to think about initial gross margins?

Yes, so I think for this year, we've always talked about having kind of target gross margins in the 20% to 35% range over time. We'll probably be at that low end of that range for this year so around 20% in this year. And it'll be a combination of both the product development contract revenues and the product revenues. The product revenues have slightly lower margins this year because their initial production units, but as volumes start to scale than we will start to get economies to scale in those productions. So the combination of those things will allow us to get to around 20% this year and see it start to scale up next year as manufacturing increases. And then we expect as we get into the out years we are going to have access to a software platform that people have to get access into. And as that starts to scale in the coming years that will also provide an incremental gross margin improvement.

Very good and good luck this year.

Thank you.

Thanks so much.

Thank you. Our next question comes from Guy Hardwick with Credit Suisse. You may proceed.

Hi guys. Hi Kiva, Drew.

Hi Guy.

Hey Guy. Thanks.

Thanks for joining us.

No, no problem. So since you have you manufacture XMs in Q4? You're manufacturing now, I think you said XTs and XMs and Sea Class. So what sort of inventory would you have at the end, say for the sake of argument June 30, because you're not anticipating any sales in the first half it sounds like. So what kind of – what sort of inventories will you have in the mid-year and can you marry that in terms of cash burn or what does the cash burn imply you'll have in terms of inventories in the middle of the year?

Yes, so the cash burn that we've talked about is mostly going to be focused here in the beginning of the year. We're expecting that we should see that decline as we get it further into the year. The company that made some smart moves last year in trying to accelerate products and bringing them to market by bringing in consultants to assist in some of the development work and they will roll off as the year progresses here. So as it relates to cash burn, we expect that we'll see that kind of sort of trail down a bit as we get further out into the year in the coming quarters. So high in Q1 and starting to ease off in Q2, Q3 and Q4. As it relates to the inventories we're really doing a little bit of, we're not over manufacturing here beginning of the year, so we're just producing enough to meet anticipated demand as well as we need to have some just for getting out and doing – just kind of demoing them and getting them around the organization and other further testing on the unit. So as we progress into the year, we'll consider advancing on and manufacturing more units, but we should be just producing enough to meet the current year demand.

All right. So in terms of what is ready now to actually go straight for a customer and be used do you still feel you need to have more testing in terms of, although, you have manufactured units for commercialization, do you still feel you're not actually ready to sell any products to the customer today for use in the field?

No, we're definitely ready. So again, with any new variant or full solution, so great example is on the Sea Class, right. We're making some additional changes, but we have the hardware development kit to go onto the VideoRay unit. So again, our focus now is continuing to develop where the spaces and places the product can go. So we've got the channel partners, like I've mentioned with VideoRay but each solution is a combination of hardware, software, and some form of a platform. So every time we attach to a new platform, we do have to make sure that we have that hardware development kit and can execute effectively. Right now, we've got an arm, last time I checked, I think it had 600 hours on it in a cage testing and running and going. So we're doing all that test validation in both locations in Pittsburgh and Salt Lake City as part of the design process. So once we say it's commercially ready, it's commercially ready.

And just lastly for me, if you have a new customer – potential customer you meet with today for the first time, and how do you anticipate the sales cycle to look like now that you have the product available?

Yes, great question. So definitely, robotics lead time is that I think that's one of the key questions we get all the time. How long does it take to do a custom solution? I'd say the advances that we've made there and definitely the controls team and the simulation team, we've really reduced, as we've talked about before via our physics-based model, that development time. We're not having to iterate as much hardware and software together. We can take a current product, we can test it in simulation and then really understand whether or not we can perform that task. So we've greatly reduced the cycle time. The focus for us right now, the aviation use cases, the sub-sea use cases, the construction at height use cases, those are full solutions that we're testing. So for us, the development time and the sales cycle time goes way down because we know what the – how the product has to perform in field, every time we get a new one, we have to go to that process again. But for where we're targeted and the SAM and TAM that we're really focused on right now in those segments, the product that we have today can fit and meet the needs without redeveloping it.

Thank you.

Thank you. And this concludes the Q&A session. I'd now like to turn the call back over to Kiva Allgood for any closing remarks.

Yes, great questions and thank you for joining us today. After hearing from us, I hope you understand our optimism and enthusiasm for the future of Sarcos. We are enabling the workforce of the future by combining human intelligence and judgment with the strengths, endurance and precision of machines to create dexterous robots that operate in unstructured real world situations. I would also like to thank the entire Sarcos team for their commitment to our mission and our values. It's exciting work and Drew and I look forward to telling you more about us in the future. Thank you for joining us today. Have a great evening.

Thank you. This concludes today's conference call. Thank you for participating. You may now disconnect.