Good morning, and welcome to the Sono-Tek Corporation Mid-Year Fiscal Year 2024 Earnings Conference Call. All participants will be in listen-only mode. [Operator Instructions]. Please note, this event is being recorded. I would now like to turn the conference over to Stephanie Prince from PCG Advisory. Please go ahead.

Thank you, Andrea, and thank you to everyone joining us today. Sono-Tek released their second quarter and first half fiscal 2024 results premarket this morning. If you don't have a copy of the release, please go to the company's website at www.sono-tek.com and click on the Press Release News Tab in the Investor section. Product, market and geography sales tables on the last page of the release will be part of today's discussion. With me on the call today are Dr. Chris Coccio, Sono-Tek's Chairman and CEO; Steve Harshbarger, President and COO; and Steve Bagley, Chief Financial Officer. Before turning the call over to management, I'd like to make the following remarks concerning forward-looking statements. Please note that various remarks that may be made on this conference call about future expectations, plans and prospects for the company constitute forward-looking statements for the purposes of Safe Harbor Provisions under the Private Securities Litigation Reform Act of 1995. Actual results may vary materially from those indicated by these forward-looking statements as a result of various important factors, including those discussed in the company's filings with the SEC. The company assumes no obligation to update the information contained in this conference call. I would now like to turn the call over to Chris Coccio, Chairman and CEO of Sono-Tek. Chris?

Good morning, and thank you, Stephanie, and thank you everyone for joining us. Today, we're going to discuss our second quarter and first half of fiscal year 2024 results that were released this morning before the market opened. I will begin with some opening remarks, and then Steve Bagley, our Chief Financial Officer, will provide a financial review. Steve Harshbarger, President and COO, will then go through the business and operational results. Following his comments, we'll open the call for your questions. Now, as a reminder, Sono-Tek currently holds two earnings calls per fiscal year. This is our midyear call for the six months ended August 31, 2023. Our fiscal year-end is February, so fiscal 2024 will end on February 29, 2024, and our next earnings call for the 12 months of fiscal 2024 will be in May of 2024. Now, as many of you already know, Sono-Tek developed a revolutionary method of applying thin film precision coating several decades ago. The proprietary technology involves the use of our advanced high-frequency ultrasonic nozzles, incorporated into specialty motion control systems, and these are able to achieve uniform micron and nano thin coatings onto our customers’ products. Our solutions offer dramatic savings in the raw material, water, and energy usage, and are environmentally friendly therefore. Now the first critical advantage of our ultrasonic coating systems is the ability to apply precision thin films, which are vitally important in today's world, with thousands of products and micro-components now requiring a functional or protective coating to be added to them. The strategic shift that we made several years ago to offer more complex, complete solutions has meaningfully broadened our addressable market and resulted in significant growth in our average unit selling prices. Excuse me – our larger machines now commonly sell for over $300,000,…

Thank you, Chris, and good morning everyone. For the second quarter of fiscal 2024, net sales increased 50% to $5.64 million and increased 57% from the $3.6 million reported in the first quarter of this fiscal year ended May 31, 2023. Steve Harshbarger will go into more detail with respect to sales. During the quarter, approximately 43% of sales originated outside of the United States and Canada, compared with 56% in the second quarter of fiscal 2023. Gross profit increased 48% to $2.8 million, compared with the prior year period. The gross profit margin was 49.7%, compared with 50.4% for the prior year period. The decrease in the gross profit margin was due to product mix. Operating expenses increased 30% to $2.2 million compared to $1.7 million in the prior year's second quarter. As Chris pointed out earlier, technical headcount increased approximately 10% across several areas. Research and product development costs increased 56% to $789,000, primarily due to increased headcount and related salaries and the higher costs of research and development materials and supplies, all of which are used – excuse me, all of which are used in the development of new products for new and existing markets. Marketing and selling expenses increased 22% to $945,000 for the quarter. The increase was due to increased headcount, salaries, commissions, travel and trade show expenses, partially offset by a decrease in insurance expense. General and administrative expenses increased 15% to $501,000, primarily due to increased salaries and professional fees, partially offset by a decrease in stock-based compensation expense. Operating income increased 218% to $566,000 for the second quarter. The increase was primarily due to increases in revenue and gross profit, offset by an increase in operating expenses. Operating margins for the quarter increased to 10% from 5% in the prior year period. Interest and dividend income increased to 124,000 in the second quarter of fiscal 2024, compared with 19,000 for the second quarter of fiscal 2023, primarily due to the current higher interest rate environment and our large cash balances. Net income was 541,000 or $0.03 per share, compared to 162,000 or $0.01 per share for the second quarter of fiscal 2023. The increase primarily resulted from an increase in gross profit and interest and dividend income, partially offset by an increase in operating expenses and income tax expense. Diluted weighted average shares outstanding increased slightly to approximately 15.7 million shares. We've continued to add to our cash holdings, cash, cash equivalents and marketable securities at August 31, 2023, were $12.3 million, approximately $900,000 higher than at fiscal year-end, and we continue to carry no debt on our balance sheet. CapEx for the six months was 246,000, all of which is directed to ongoing upgrades of our manufacturing and development lab facilities. We expect to invest approximately 500,000 in new equipment for the full year. And now, I'll turn the call over to Steve Harshbarger, President and COO for an operational review of the second quarter, Steve.

Thank you, Steve. Good morning, everybody and thanks for joining us today. As most of our listeners likely know, Sono-Tek breaks down our sales in three ways, by markets, by product, and by geography, and that's how I'm going to address these in my upcoming comments. Please refer to the short tables on the last page of our earnings release for all the details. For the second quarter, we were excited to report net sales of $5.64 million. This came in ahead of our expectations and is a 50% increase from a year ago and a 57% increase compared to the first quarter of the fiscal year, which ended now on May 31, 2023. The increase was primarily driven by increased shipments of our multi-access coating systems, which are commonly used in the clean energy and medical device markets. For the quarter, sales of these multi-access coating machines were up 96% and totaled $2.9 million. These systems contain some of our newest and highest ASP platforms, and they were also the most severely supply-constrained product lined up through our first quarter of this year. We were able to finally break out of this last year's supply chain issues and meaningfully increase shipments as a result of a significant program we implemented to broaden our supply chain options, which included increasing our own vertical integration with the introduction of a new multi-access product line that we call the NovoCoat. This vertical integration expansion is a process that is ongoing, and we're continuing to build and increase the depth of our in-house manufacturing capabilities every day. Integrated coating systems sales doubled to $853,000, driven by sales of our newly developed Float Glass Coating platform, which is continuing to gain acceptance into the market. Fluxing systems sales dipped against a tough comparison to…

Would you like us to take over Steve. [inaudible]

Yeah. All right, I think I'm back. That is the highest reported backlog in our history and it reflects the increasing order activity from the clean energy sector in particular. This also includes the recent $2.19 million order that we announced, which is the largest order from – from this sector to-date and the largest in order history. Customer deposits reached $3.4 million at August 31, reflecting the continued receipt of several large new orders. We generally require deposits of 50% or greater on orders valued at over several hundred thousand dollars. In closing, and as Chris mentioned earlier, our outlook is strong and we're expecting a very good second half of the year, with a minimum of 25% year-over-year sales growth for the full fiscal year ending February 20, 2024. Again, I apologize for my cough there. I caught a little cold over the weekend that's still lingering with me. And now we'll turn it back over to the operators for some Q&A if I can speak.

[Operator Instructions]. And our first question will come from Ted Jackson of Northland. Please go ahead.

Good morning, Ted. I don't know if you can hear me, but I can't hear you yet.

We can’t hear you, Ted.

I don't think anybody hears – does anybody hear Ted Jackson?

No. Yeah, I don't hear him.

Maybe we can come back to Ted and maybe figure out the audio there.

Okay. [Operator Instructions].

I suspect maybe everybody is afraid to ask me a question because I will start coughing.

All right. That was Ted Jackson. Nelson Obus had a question. I don't see his - can our conference coordinator pick up the other question? They are having technical issues, according to...

It looks like we have several people in the queue for questions, but it doesn't sound like we can get them through so we can hear their questions.

Yeah, yeah. Stephaney is trying to...

Sorry about the technical issue on the quarters call.

Right.

For those of you still with us, if you can hear us, just hang tight. We're trying to work out the technical issues through the Chorus Call Group that organizes this for us.

Correct. The Chorus folks are saying this never happened to them before.

It must be that – I think it's that guy Murphy running around.

Pardon me. The next question will come from Nelson Obus with Wynnefield Capital. Please go ahead.

Hi there! Can you hear me?

Oh, we got you, Nelson. Thanks for joining today.

I'm just curious what the EBITDA comparison was in the quarter.

Mr. Bagley, do you have the EBITDA there?

If you give me a second, because I do not have the calc right in front of me. Hold on a second there guys.

I would say while he's trying to get an answer to you that we typically don't even look at EBITDA. I know financial companies do, but we're more focused on our growth and our earnings and our cash.

Yeah well, it's very helpful for figuring out what the private market value is, which is a better – I think that's something you should think about. It's not just financial companies, it's basically across the entire board and you should get credit for your cash, which is licensee, enough with that.

That's a good point. EBITDA, I've got income before taxes, so 715. I'm adding back my depreciation amortization. I'm coming in around 994.

Well, very nice. Now look, I mean, don't get me wrong. I'm not a fan of quarterly reporting, but we're in an interesting period where it looks like the economy may be slowing down. You're an industrial company that is operating in a way which is very counter to a lot of what industrial companies are concerned of, which is an economic slowdown. Can you just help me? What's the rationale for not having – particularly in this environment, not having quarterly calls? Because I think that you're atypical and you should get credit for it, and you're going to put a Q out, and why not put color in it? I think that's something the board should think about. But can you help me out? It's the only company, except of course for foreign companies, that don't have conference calls quarterly. Either they don't have them or they have them quarterly. But in this particular situation, given the time we're in, given what the promise your company has, doesn't that make sense to consider doing it quarterly?

That's good input, Nelson. I will say that we had typically never done any quarterly calls at all. So this is all relatively new for us, and we thought as a start we'd get our feet wet with doing them semi-annually, but its good input. Maybe we should be thinking about going to quarterly conference calls. We had at some point planned to make that transition once we kind of got our feet wet into this whole process. As you know, the IR aspects of this is relatively new for our organization, but that may be a good next step for us to follow on, and I'll discuss that with our BOD going forward.

I think you're hiding your light under a bushel basket. You've given us numbers that are quite attractive and quite counter to what a lot of industrial companies are experiencing. So getting rid of that bushel basket, I think, would be something to think about. The other question is, look, I understand why the gross margins percentages are down slightly in terms of the mix, in terms of your gearing up for a lot of additional work and hiring some more specialists. But as you look out, do you anticipate perhaps in a normalized environment some operating leverage, which would be reflected in higher gross margins on a higher revenue base or is that not in the cards?

I think that we will see – oh, go ahead Chris. Do you want to speak to this?

Yeah, I was going to say that there are trends that are competing with each other. Typically, when a company starts to bring in more outside equipment into their sale, you would expect the margins to go down, gross margins, but that hasn't happened here. I think that's the other side of the coin, is that we're probably getting some credit for our dominance in this market that's been holding it into the 40’s. Actually, it's been in the high 40s, but our history is in the 40s and it's staying in there. So there are things going on, on both sides of that.

The one thing I would add to that, that this past quarter, Nelson, we had a couple of things occur that affected the gross margin. One is, our OEM sales were unusually low as a result of our OEM partners building up excess inventory. They basically didn't anticipate that they were going to - they thought they were going to have supply chain issues, so they built up excess inventory and our OEM sales are very high margin items. And that happened in combination with some new products that we introduced in this quarter. And these new products, it was that NovoCote platform that I mentioned earlier. They are quite complex, big platform systems that a lot went into. And your first release of those new products, you don't put as much focus into reducing costs as you do to get them out there and having them functioning well for the need. And as for most of our product lines, once we release a product line, we'll typically over six months or so follow that product line with some reduction in costs, which don't affect quality of course. But they are just things that you could say, hey, listen, where can we make some efficiencies in that manufacturing process with different parts or different ways to build things that will reduce some costs out of there? So I do think there'll be a couple of things that will occur simultaneously here, that will help margins in the future, in addition to just general operational leverage that we're bound to see some of that happen, I would say, at some point here.

Very helpful. Look, last question. It's one heck of a ramp in sales. By the way, you should be happy that of course that your gross margins held practically at 50%. But last question, I mean, you have a big ramp in sales. What's your capacity utilization? I mean, do you have the ability to grow physically into this incredible ramp up in revenues?

Yeah, within the existing facility here, we're fortunate, we bought our industrial complex, which is five buildings, of which we're in three of those five buildings right now. And that was, within those three buildings right now, we think we can get up to around the $25 million to $30 million area. And that with then moving our existing tenants out, which we have short-term leases on the remaining two tenants, one of them ends in May of this coming year, and the other one ends shortly after that. We should be able to get up into the $40 million, maybe mid-$40s million or so of revenue within the existing facility. Now once we go beyond that, we will have to start thinking about further expansion. But at least we have enough existing space within our complex right now to get up into that mid-$40s million for revenue.

Good, okay, great. Thank you, great quarter.

Thank you.

Thank you.

The next question comes from Bill Nicklin. Please go ahead.

Hi, thanks. You guys must be working hard, because you're all sick. From a shareholder perspective, we really appreciate your sacrifice. So anyway, I just want to touch back quickly on the gross margin thing, because you've been running about 50%. You're now doing the larger production machines, which have more spare parts associated with the order and also service. So it would seem to me that your margins ought to stay as high as they were in the past, which therefore keeps them above the 50% margin, which I think analysts have in their models out there. So am I missing something?

Well, you bring up a good point there Bill, that you know one of the areas that we're just now starting to roll into our revenue stream is for the large ASP machines that we send out there in the field. We're finding that the customers are buying 10% to 15% extra revenue from us for service contracts or spare parts packages, and those are both obviously very high margin areas. Now today, we only have a handful of these million dollar plus lines out there that are in operation. But as that fleet of machines starts to increase, we should start to see a much more significant revenue stream come in, where it will start to become significant and it should be a high margin revenue stream. It's going to take some time for that to build, but the more and more of these we put down in the field – and that's a recurring thing too. They don't just buy those service contracts one year. It's every year kind of recurring revenue stream, maybe for the life of the machine, 10, 15 years or something like that. So that should definitely impact our margins in a positive way.

Thanks. Second question. This recent production equipment order, is this an anomaly or is this something you expect to see going forward, something that has legs?

I certainly don't think it's an anomaly. You know there is, in particular in the green energy sector right now, the clean energy sector, there's so many of these customers that are transitioning to high volume production. They've got an established process with our machines for either R&D and pilot line scale. And now they have found the money all of a sudden from all these government initiatives, and private industry I should say too, that is complementing the government initiatives to immediately scale to high volume production. That's a customer base that we've had for a long time. It's been a huge customer base of ours, but they've never had the financial backing to say, I'm going to make that transition over to high volume production, but they do now. So we anticipate that to continue, both with our existing customers that are already buying them, but also new customers. There's so many companies that you may not have heard of, say three or four years ago, but they are now public companies. They are growing and they are saying, well, we are in the clean energy sector and we are scaling for high volume production right now. So I anticipate that to continue for some time to come. And it will also I should say, continue in other sectors outside of the green energy sector for us. It just happens to be that green energy is the most hot area for us right now. But once you have the ability to scale to high volume, you can really do that for any sector, whether it's the semiconductor sector or whether it's the industrial sector or medical sector. Once you have that in-house technical capabilities to scale for super high volume throughput, then it's easy to do so across all the industry sectors.

Thank you. I heard that you're on the second part of one of your large orders. If you look out behind that into your sales funnel or pipeline, whatever you want to call it, do you see these same customers having an appetite for multiple machines in some instances or maybe many instances beyond what you've already got in your backlog?

Yes. For our existing customers that are purchasing these large platform high ASP machines, all of them have indicated they are at the beginning phases of their requirements. A couple of machines doesn't come anywhere close to meeting their ultimate needs for production throughput requirements. So we're optimistically anticipating that we'll see follow-on sales from those customers for other manufacturing lines to continue.

And then, another kind of a general question. You're talking about your transition. It seems to me that your customers are making an even more dramatic transition in their business. What is it that Sono-Tek has in their solutions that is such a critical part of the customer's transition?

Yeah, I guess the important word you just used in your question was the word solutions. What are the Sono-Tek solutions that are vitally critical to our customers transitioning with our new or different coating need? When we partner with our customers to provide full system solutions, it entails all aspects of what we're guiding them through to a successful transition to coat their products. Sometimes we're providing the solution with the proper application engineering expertise or new ultrasonic coating equipment or providing complex parts handling or software or more likely even a combination of all of these together. So when you're at the forefront working with technology-based customers, introducing next gen products, which is where Sono-Tek really finds itself very often these days, we're almost by default guiding these customers through a transition process. Some of our customers may be transitioning from a product that's never had a coating on it prior, to their next gen product that now requires a functional coating on it. In other cases, such as what we're seeing in the clean energy sector, our customers may already have defined the coating process using Sono-Tek machinery and they are simply just transitioning to high volume production machinery from us. And it's really actually a transition that both Sono-Tek customers are going through, as well as a transition that Sono-Tek Corporation is going through with our customers simultaneously. We're simultaneously transitioning our organization to expand our capabilities to meet the needs of our growing customer base. So I know that was kind of long-winded, but to swing back to your original question, it's really a multitude of critical deliverables that we're providing our customers to guide them through the transition to Sono-Tek machines. But at the end of the day, it's all focused around Sono-Tek providing the customer whatever is necessary to create the desired thin film coating on the product that they want to manufacture.

All right. So I think what I heard is that there's some commonality here in these transitions, but there are really many different transitions taking place across several different industries or markets that you serve.

That's exactly correct, Bill. There really is.

If I might add a comment, Bill, the way it shows up in our business, our factory, is both in the systems engineering aspect and the overall product engineering. I mean, a lot of it ends up being common, even if it ends up going to a different market segment. So we're taking advantage of that. We're hiring a lot of people, as we mentioned, who have the skills to do that systems integration, the software and hardware integration. And I think that will be a great asset for us as we go forward.

And one final question. Thanks, Chris. And one final question on the fluxing line, which as you mentioned is kind of an early basic business where you've come out with a new product. And I had a specific question around displays and this whole mini LED TV transition that's taking place in the display industry. It would seem to me that you folks would have some participation there. And if that's true, I'd like to know a little bit about it and how far down the road it is before you might see something affecting your fluxing product there.

Sure. We always are exploring new high-tech areas you know, and there's a particular technology that's getting a lot of press these days, which is micro LED. This is kind of what people are anticipating will be the next-gen monitors and TVs out there to come. And there is some processes in that area that could use coating applications. And it is an area that Sono-Tek is most definitely participating in, and that we are – have actively sold some machines to in that area, received some orders from machines in that area. I'm not going to go into too much more detail for competitive reasons on that area, but it's certainly an area that we're anxious to participate in.

All right. That does it for me. Thank you, and be well. We need you to keep pumping out there.

Thanks. I appreciate that, Bill.

The next question comes from Ted Jackson of Northland. Please go ahead.

Hey Ted, you there?

What is going on? Hello!

We got you now, Ted.

Okay. I'm about to throw my phone against the wall, so. Anyway, so I'm going to start with just a little weedy thing, but the OpEx was up quite a bit relative to, I'd say, my expectations. And obviously you're investing in the business, and that's what you need to do. But can you just provide a little color on how at least I should think about that for the back half of this fiscal year and next?

Yeah. I mean, the OpEx was certainly the area that grew the most, and it was certainly a result of – we are doing so many more of these high ASP, large platform, custom-engineered solutions right now and anticipating, based upon our quoting, that we're going to be continuing that trend. And so what has occurred is we had to really beef up staffing in that area, mostly both on the sales engineer area, as well as the mechanical and EEs and the IT infrastructure guys, the programmers, that all of those areas needed to get beefed up in order to support the future growth of these custom engineered complex machines. So that's what we've done. We made a big investment there to support that, and we would – only we are doing that because we see that the customer base is growing for us in that area and we don't want those customers to turn them away. We want to be able to say we can take on these large complex projects. We have the personnel and the capability to do that. So that was the big increase you saw there.

Yeah, we're adding different types of engineers, but I would say that Steve mentioned the concentration of additions is really in systems and controls engineering, because the equipment's going from, let's call it straightforward equipment to smart equipment, and things need to be integrated, both within our line that we supply, but also with the customers product line, manufacturing line. So that requires the addition of some other skills that we had not previously had. We would sell, let's call it Microsoft based type of controls, basically digital computers and a lot of our customers out there in those big plans have TLC types of controls. So we're moving in that direction as well, because we can access a much bigger market. So yeah, there's upfront costs if you will in terms of hiring, but if you look at the whole picture, there's plenty of sales going forward to justify it, so that's what we're doing.

Yeah, and I don't question that at all. I mean, I think it's very much an appropriate investment. I just want to more kind of understand, now that you've had a couple of times where you've had to put a – you had a tick up in expenses at the operating line, and that's been a result of wage pressure, which is obviously still there and then hiring. And I guess I'm just kind of asking how I need to think about that as I – in 2024. Now that you have this higher base, is it a little more back to sort of like, you know what I'm saying, a normalized growth or is that something you're still going to be investing in and I should expect another good size tick-up in it as we think about the, kind of the coming quarters?

I think it wouldn't – I don't think it will be growing at the same rate that you just saw there over this past quarter, but I do anticipate that we will be growing, because as an organization, we're going to be growing and we're always looking to develop that next thing that we haven't done yet. We’ve been always looking to expand upon our capabilities. So as long as we're heading down the growth path as an organization, that's going to be the one sector that I see continued growth will be required, but to be able to support that customer base growing.

Okay. Then to some more like fun and kind of growth questions. When you look at the medical and alt energy areas, you had a very robust quarter for both of them. And I'm curious with regards to that robustness, how much of that was from some of the delayed business that it's been impacting the financial since the second half of last year, and how much of it was from stuff that's been more recently won. And then also maybe within both of those buckets, some color in terms of the specific applications that drove the revenue.

Yeah, got you. It was – it's probably about a 50/50 split. We were just looking at that, what was things that we had hoped to have shipped out earlier, and then what was new stuff that was coming into us. So as far as the split from that aspect, the system that we shipped a lot of this past quarter were to these big multinational medical companies where they were our customers for more simple medical device systems, primarily our stent coating systems. But now they are just returning to us and buying our medical device systems for all these really complex new devices, new implantable systems, which they now recognize that we're not just a one application company for medical. They know that, hey, if it's any medical device, and you want to coat it, Sono-Tek is a good alternative that you should be considering and that's what's happening. So they are just returning back to us, these existing customers, but for new applications that they've never done before. And that takes a lot of work in the development lab or their application engineers to help define those processes. But they are beginning to look at us as their expert. That we are in basic, their coating arm for many of these large medical device companies, and they are coming to us and saying, ‘hey, help us Sono-Tek. We don't want to figure this out, but you guys we know can. And that was the big impact for us primarily as the medical. The industrial ones were more new platforms that sold, were of – with people upgrading from their old platforms.

I’d say that's about kind of the alt energy, but I mean is that more, in terms of delivery there, is that more carbon capture? Is that more thin film on panels? Is it, clean hydrogen?

Got you. Yeah, the existing shipments that went out this past quarter was more focused towards the coating of the critical membranes that are used in fuel cells, carbon capture and green hydrogen generation. But our backlog has been increasing fairly drastically, more in the thin film solar area, and that's been a very exciting turn for us, because thin film solar kind of took a dive down years ago. But there are some companies that are still very, very profitable and doing well in this area, and we've made some good partnerships in that area for the future, for multiple systems heading forward we believe.

All very exciting Steve. And last question, and then I will get out of the line if there's one left. And you touched on it already is, the backlog up in the quarter, in a really strong quarter, that's like very exciting. It really makes me feel really good about not just the rest of the year, but next fiscal year. Can you give some color exactly kind of from an application perspective, what comprises that backlog? That would be my last question.

Sure. It's fairly mixed. However, the most heavily weighted is certainly going to be the clean energy sector. And again, that's just where we're just seeing so much activity with the transition to high volume production machines. And I should even say, there's still a lot of companies coming again, that are brand new companies coming in and asking for R&D machines as well, in combination to the companies transitioning to high volume production machines. So I don't see that sector slowing down at least for the next several years, and maybe far beyond. But it seems like that's just a really good place right now. And if these high volume companies are able to successfully transition into high volume production all the way through it, I mean the upside potential is very strong in that area for sure.

Okay. Well, that's it for me. Congratulations on a fabulous quarter. I’ll talk to you later.

Hey, appreciate it Ted. Good talking to you.

Thank you. The next question comes from Dick Ryan with Oak Ridge Financial. Please go ahead.

Thank you. Congratulations on a strong quarter, guys.

Thanks, Dick.

Steve, just another circle back on the backlog. It sounds like there's a $1.1 million in there, and then the $2.19 million is in there. So that's kind of 30% of the backlog. Are there any other million-dollar plus systems in that backlog? And how should we look at the timing of that backlog being delivered?

Yeah, those are the two most significant orders that are in the backlog presently. There are several other orders that are in those, that few hundred thousand-dollar plus area, which is becoming kind of a more common type of machine for us to be selling now, these $300,000 plus machines. The backlog split right now, and it's going to be somewhat close, which is delivered next fiscal year or this fiscal year. It's going to be good either way. But it's about a 50/50 split, if we had to guess, between what's going to be shipping this fiscal year that's in the existing backlog and what's going to be shipping next fiscal year. It's a good ballpark. Maybe 60/40, 40 next year, 60 this year, but it's a pretty good chunk that's already planned for next fiscal year, because the build time and the delivery of some of these large, complex machines takes quite a while. They can take nine to 12 months in many cases.

Sure, sure. You probably don't want to quantify it, but you talked about your quote activity picking up. Can you describe how your quotation book looks now versus six months ago? If you would care to quantify, that would be great also. And maybe tying into that, does the traffic in the labs feed into the quote book? If so, what's your traffic in your labs?

We don't quantify the quotes out to the public, but the one thing we'll see is that the closure rate on the quotes is increasing. So the percentage that we're quoting out – excuse me, we're actually buying a machine is increasing and the quotes are for higher dollar values than typical, compared to say last year, the higher ASPs. So that's what's significant there. The laboratory facility is jam-packed right now. It's – every week we're just always trying to find the space to try to bring the next person in. I think right now we're booked out two or three months and it's a challenge that we'll probably at some point – we've expanded our lab several times now, but we'll probably have to expand the lab again at some point here to accommodate the growth that we're experiencing.

Okay, one last one. You talked about your Alt Energy customers moving from R&D to higher levels of production. You're seeing that list broaden. I mean, are you dealing with one, two or three customers there or are you kind of approaching double digits that this thing really can have some legs when we look out over the next few years?

As far as customers that we're actually delivering or have delivered systems to, it's still just a handful right now that are doing this in super high volume. But as far as where the coating activity is for those customers to expand to becoming double digits, it's very high. What we're seeing right now, the customers that have already made the transition to our high volume production machines are really at the forefront. But there's a whole other wave of customers behind them, which are not there yet, but they are heading there. So we're optimistically thinking that that group of customers will transition at some point here in the future as well.

Okay. I guess I had one last one. You talked about solar. Historically, how big was solar in its heyday for you guys and is there an opportunity to kind of get back to that level or grow from there?

Yeah. Ten years ago, before the solar wave crashed, that's about ten years ago I think, I think Sono-Tek was doing $2 million or $3 million solar there, which was at that time, we were a smaller company, so it was significant. I think that was, I don't know, 40% of our sales or something like that, but now $2 million or $3 million isn't really going to shift the lever significantly for us. The existing solar customer base now that we are communicating with, I mean, I think we anticipated to be significantly larger than that. If it was only $2 million or $3 million, it would be a big disappointment for us. That, it has much larger potential and the primary reason is, is we're not selling R&D machines there anymore. We're selling high volume production machines with high ASPs and that makes all the difference in the world.

Yeah. Okay, great. That's it for me. Thanks Steve and guys, and congratulations.

Appreciate it Dick. Good talking.

This concludes our question-and-answer session. I would now like to turn the call back over to Chris Coccio for any closing remarks.

All right. Well, thank you, and thank you everyone for joining us today. Sono-Tek's outlook is strong based on our ongoing success with platform initiatives in the high-tech and clean energy markets. We look forward to our next call that will review our year-end fiscal 2024 results next May. Please contact us directly if you have any questions before then. Be well and stay safe.

The conference has now concluded. Thank you for your participation. You may now disconnect your lines.