Hello and welcome to AAR Corp. Third Quarter 2025 Earnings Conference Call. At this time, all participants are in a listen-only mode. After the speaker's presentation, there will be a question-and-answer session. [Operator Instructions] I would now like to turn the conference over to Denise Pacioni, Director of Investor Relations. You may begin.

Thank you. Good afternoon, everyone, and welcome to AAR's fiscal year 2025 third quarter earnings call. We're joined today by John Holmes, Chairman, President and Chief Executive Officer; and Sean Gillen, Chief Financial Officer. The presentation material we are sharing today as part of this webcast can also be found in the Investor Relations section under the Events and Presentations tab located on our corporate website. Before we begin, I'd like to remind you that the comments made during the call may include forward-looking statements as defined in the Private Securities Litigation Reform Act of 1995. These forward-looking statements involve risks and uncertainties that could cause actual results to differ materially from the forward-looking statements. Accordingly, these statements are no guarantee of future performance. These risks and uncertainties are discussed in the company's earnings release and the Risk Factors section of the company's annual report on Form 10-K for the fiscal year ended May 31st, 2024. In providing the forward-looking statements, the company assumes no obligation to provide updates to reflect future circumstances or anticipated or unanticipated events. Certain non-GAAP financial information will be discussed on the call today. A reconciliation of these non-GAAP measures to the most comparable GAAP measures is set forth in the company's earnings release and slides. A transcript of this conference call will be available shortly after the webcast on AAR's website. At this time, I would like to turn the call over to AAR's Chairman, President and CEO, John Holmes.

Great. Thank you, and welcome, everybody, to our third quarter fiscal year 2025 earnings call. I'm pleased to report another strong quarter at AAR with record results in both sales and adjusted EPS. This past quarter, we successfully drove value throughout the organization by growing our aftermarket services and significantly improving our margins. We continue to benefit from a strong demand environment in both our commercial and government end markets, which we anticipate will continue through calendar year 2025. Turning now to Slide Three, I want to highlight some of our achievements from this past quarter. Our third quarter sales of $678 million improved 20% year-over-year, setting a new third quarter sales record for the company. We saw continued strength across our business segments as consolidated sales to commercial customers increased 22% from the same quarter last year and sales to government customers increased 15%. While top-line sales grew from the same period last year, we also demonstrated meaningful improvements to our bottom-line results. Adjusted EBITDA of $81.2 million was higher by 39% from the same quarter last year. EBITDA margin increased to 12% this year from 10.3% in the third quarter of last year, driven by strong performance in our new parts Distribution activities and our Airframe MRO operations, as well as our Product Support acquisitions. Once again, the combination of sales growth and margin expansion resulted in a significant increase to adjusted earnings per share, which grew 16% to $0.99 compared to $0.85 from the same period last year. Additionally, this past quarter, we reduced our net debt leverage to 3.06 times from 3.17 times in the prior quarter. Our strong balance sheet and disciplined capital allocation strategy have us well positioned for investments that will continue to drive growth. Turning now to Slide Four, I will discuss…

Thanks, John. Looking now to Slide Five. Total sales in the quarter grew 20% to $678 million year over year, setting a new third quarter sales record. An improvement in Parts Supply driven by an increase in Distribution activities along with higher sales in Repair & Engineering resulted in a significant sales increase from the same period last year. Sales to commercial customers increased 22% and sales to government customers increased 15%. For the quarter, total commercial sales made up 72% of total sales, while government sales made up the remaining 28%. Compared to the same quarter last year, adjusted EBITDA increased 39% to $81.2 million and EBITDA margins increased to 12% from 10.3%. Adjusted operating income increased 39% to $65.6 million with adjusted operating margins improving to 9.7% from 8.3%. Our focus on airframe maintenance efficiencies and the contribution from the recently acquired Product Support business continues to help improve margin performance. Net interest expense for the quarter was $18.1 million reflecting financing from the Product Support acquisition. For Q4, we expect net interest expense to remain consistent with these levels. We also expect our Q4 effective tax rate to be approximately 30%. The increase in the effective tax rate is due to the impact of the impairment associated with the Landing Gear divestiture. In future quarters, we expect our effective tax rate to be approximately 28%. Average diluted share count in the quarter was 35.4 million shares. Year-over-year adjusted diluted EPS increased 16% to $0.99 from $0.85 in the same quarter last year reflecting the benefit of our growth and margin expansion. With that, I'll turn to the detailed results by segment, starting with Parts Supply on Slide 6. Part Supply sales grew 12% to $271 million from the same quarter last year, driven by growth in both…

Great. Thank you, Sean. Turning to Slide 10. In summary, for Q3, our strong performance in new parts Distribution, Airframe MRO and Trax led to better-than-expected operating margins and our integration of Product Support is on schedule. Performance in USM remains variable due to market dynamics, but the overall strength of the rest of the company is allowing us to accelerate our margin expansion efforts. As it relates to Q4 FY'25, we expect year-over-year sales growth in the mid-single-digits. The sales growth guidance assumes approximately one month of Landing Gear revenue will be included in our Q4 financial results. Excluding the impact of the Landing Gear divestiture, our year-over-year sales growth will be closer to the high-single-digits. We expect adjusted operating margin in the range of 9.7% to 9.9% in Q4. As Sean mentioned, we also expect our net interest expense to be consistent with Q3 of $18 million and our effective tax rate to be approximately 30% in the quarter. Just as we stated last quarter, we continue to see strong demand signals from our largest commercial and government customers. We expect growth and margin expansion to continue this year and through FY'26. Before turning it over to the operator for questions, I would like to thank the team of dedicated employees, our customers and our shareholders for your continued interest and support of AAR. And with that, we'll open it up for questions.

Thank you. [Operator Instructions] Our first question comes from the line of Scott Mikus with Melius Research. Your line is open.

Hey, Scott. Scott, are you there? Great. Why don't we go to the next question. Operator, maybe we could go to the next question?

Sure. One moment. Please standby for our next question. Our next question comes from the line of Ken Herbert with RBC Capital Markets. Your line is open.

Yes. Hey, good afternoon, John and Sean and Denise.

Hey, Ken.

Hey, first, John, you made a comment, again, USM. I think you said down slightly in the quarter, but you expected, I think you said that to be temporary. Can you just maybe get a little bit more about what you're seeing in that marketplace and which gives you confidence that USM sounds like could be up in the fourth quarter? And how do we think about that then into fiscal '26?

Yes. We're getting pretty good at talking about USM. So, yes, this quarter, we did have some situational things going on. As you know, in the USM business, we support, most of its engine material, and we support certain engine shops on contract. And certain of our customers saw lower-than-expected engine shop inputs from their end users which resulted in lower demand for our material during the quarter on those particular contracts. We expect that to be temporary because these were maintenance deferrals by their end customers and we expect that work to get done later and therefore we'll see the demand later. Generally speaking, consistent with what we said last quarter, we are seeing more whole assets and parts packages come to market in USM and where those assets meet our return requirements, we're in a position to invest in them where we see demand.

Great. And just as a follow-up, there's certainly been some more concern about capacity growth amongst US airlines initially and maybe now a few in Europe. Can you just comment on if you're seeing any of that yet impact your business? And maybe how much would we have to see capacity go down before you would, in fact, start to see impacts on different parts of your business?

Yes. Great question. We're certainly paying attention to the commentary from the airlines here as well as in Europe and other geographies. Generally speaking, we are not seeing any meaningful decline in demand signals for the services that we offer. So for Parts Supply, for Airframe heavy maintenance and for component maintenance, all of the demand for those services for our customers is as strong as we've seen. So at this moment, we feel quite good. Our focus would be continuing to the extent that there are capacity reductions, our focus would be continuing to demonstrate our value. So to the extent that less work is coming out of the airline, it's going to go away from our competitors and remain with us.

Great. Thanks, John. I'll pass it back there.

Great. Thank you, Ken.

Please standby for our next question. The next question comes from the line of Louie DiPalma with William Blair. Your line is open.

John, Sean and Denise, good afternoon.

Hey, Louie. How are you?

Great. Nice work on the margin expansion. That's been a focus for investors. And I was wondering, you provided the information that the Landing Gear I think is generating roughly $20 million in revenue a quarter. Should that divestiture potentially add like 30 to 40 basis points to the EBITDA margin when it closes?

No, not that much. And just to be clear, Landing Gear, the results were fully in Q3 and then we expect to close shortly. So the guidance that we gave for Q4 assumes Landing Gear's in the results for one month. It's about breakeven to slightly positive on operating profit. So it will be overall accretive to margins, but not to the magnitude you mentioned.

Okay. Great. And another question. Your Trax business, one, the deal with Cathay Pacific and you previously announced a win with Singapore Airlines. Should these deals contribute to margin expansion as they scale? And are there other Trax deals in the pipeline as it seems you have momentum there in the APAC region?

Yes. No, thanks for pointing that out. Yes and yes. So we do expect them to add volume to Trax and Trax is our highest margin business in the company. So as that business grows, it's overall accretive to margin. And we do have a very strong pipeline of customers for Trax. We can't announce all of the wins. Some customers will let us go public, some of them won't. Fortunately, Singapore and Cathay were willing to let us announce the wins. But for those that we can announce and for those that we can't, we feel really good about the pipeline of opportunity for Trax.

Awesome. Thanks, John. That's it for me.

Great. Thanks, Louie.

Thank you. Please standby for our next question. Our next question comes from the line of Michael Leshock with KeyBanc Capital Markets. Your line is open.

Hey, good afternoon, everyone. You had called out the increased throughput at MRO facilities and those have been running at or near full capacity for a while now. So it's good to see that improvement. Could you talk about the efficiency improvement and maybe how big of an impact it's had on margins? And then secondly do you see more room for increased throughput in the near-term?

Yes. Great question. So we've made if you look at the last several quarters, we've made substantial gains in margins in our airframe hangers. And we've also continued to grow sales, and we're proud of the fact that we've been able to improve margins in an inflationary environment for labor costs, in particular, and grow sales on the same footprint. And to your point, that comes from increased throughput. We do see opportunities to continue both improvements, more throughput and sales growth as well as further margin expansion in the hangers on the existing footprint in the coming quarters. To highlight one initiative and we've talked about this a couple of times, our paperless initiative inside of the hangers is still not fully rolled out. We've made a lot of progress in the last couple of quarters of getting that rolled out. So we have more runway there as that initiative fully implemented throughout our entire network. And so that will drive further margin improvement. And then beyond that, once we do complete the expansions in Oklahoma and Miami, that will drive again further margin improvement as we leverage the fixed cost base, bringing on those new bays in those two facilities.

And then maybe an update on defense opportunities. You had talked about the USM parts with DOGE. How has the activity there increased versus maybe three months ago? And looking forward when could we realistically expect those opportunities to come to fruition?

A great and timely question. So the first answer is there is actually from a USM sales to the government, we have not seen a notable increase yet. So any activity there would be upside to where we are today. I was actually in Washington D.C. yesterday. I had a number of meetings on the hill. We're talking about this opportunity. And even though it's a concept that we've been talking about with the government for some time, we are hopeful that with the DOGE commission in place and the general environment for trying new things at scale quickly, this could be the moment where we actually see significant uptake for USM. So we're encouraged by the conversations and they would be incremental to the results today because at the moment we have from a USM standpoint to the US government, we don't have much activity today.

Great. I'll leave it there. Thank you.

Great. Thank you.

Please standby for our next question. Our next question comes from the line of Scott Mikus with Melius Research. Your line is open.

Hey, John, Sean. Sorry I think I got disconnected earlier.

Don't worry. Thanks for coming back.

Yes. I saw the press release on you extending the partnership with FTAI through 2030 on the CFM56 engine. I'm just wondering did that extension of the agreement, did it come with change in economics or increase in scope? And then kind of how should we think about it ramping from this point through the end of this decade?

Yes. Great question. The partnership with FTAI has gone very well, which is why we chose to extend it. It's a very similar arrangement to what we have today where we are at the exclusive outlet for the CFM56 engine materials as they retire engines out of their portfolio. We do expect over time to continue to increase the volume from where we are today with FTAI and that's directly tied to their own scaling as they scale their own portfolio, adding more and more engines to their lease portfolio. We should see more engines coming out of that portfolio. But again we have the exclusive right to distribute the parts. So it's a continuation of what we're doing, but we do expect growth in the coming quarters and years.

Okay. And then thinking about the tariff situation, it's very fluid. I'm thinking, are you potentially doing any bulk buys of parts for your Parts Distribution business to preempt any tariffs? And is there the possibility that if there's not broad exemptions for tariffs that it could drive more demand for your component repair business?

Great question. We naturally like everybody we're paying attention to the changing landscape in tariffs. It could impact us in a few different ways. So first of all, we are not buying ahead of any tariffs. We're not making any meaningful decisions there. We are focused on keeping track of to the extent that tariffs impact the OEM price increases to us. We want to make sure that we're able to pass those increases along to the end user. And it's important to remember that we've been in an inflationary environment for some time. So even before the tariffs were part of the narrative, the OEMs have been, our OEM partners and distribution have been making substantial changes to their pricing to us, which we've had to pass on. And we've been doing that successfully and we will do that certainly in a tariff environment. As it relates to tariffs potentially benefiting, I mean, yes. So to the extent that repair work needs to stay in the US as opposed to being sent overseas. We are in a great position to capture that work given the expanded footprint that we acquired with Triumph.

All right. Thanks for taking the questions.

Great. Thank you.

[Operator Instructions] Please standby for our next question. Our next question comes from the line of Josh Sullivan with The Benchmark Company. Your line is open.

Hey, good evening.

Hey, Josh.

Just as far as the BELAC distribution agreement with Chromalloy. There's a conversation around lessors and their interest in PMAs. I mean what's your sense as you get into this distribution arrangement that the lessor market is going to be a good customer?

Yes. Great question. I mean lessors in particular we do see increasing openness to PMA. I mean obviously what FTAI has been able to achieve is a big part of that kind of change in mindset out there. So we do see that as a market. But more than that, we see many end users that own the engines and don't lease them as open to these particular PMAs. And the BELAC PMAs on the CF6-80C2 and the Pratt & Whitney 4000 engines, these PMAs have been in existence for many years. They're well-established technology. There's already broad adoption and we teamed up with Chromalloy because Chromalloy felt that we could help take their sales to the next level given our reach into the global market.

And then I guess tying that maybe a separate question, but tying it into your comments earlier about DOGE. I mean what are your thoughts about potential PMAs entering into that conversation as well?

Our focus has been more on the USM side of things. And that's a different conversation. Obviously, USM, it's the same partner in order to the same material. So that's a more straightforward discussion to have. PMA, obviously, is a different part. So the approval process is different. But for our interest, we've been focused more on the USM side.

Got it. And then I guess just one last one on Trax. As it becomes a broader based platform, when do we hit that tipping point where we really see some a lot of activity for air distribution or products flowing through the Trax platform?

Yes. Great question. That is a very significant focus of ours right now. We are really excited about the potential there. We are making investments to build that channel and we hope to have something to talk about more fully later this calendar year.

Okay. Great. Thank you for the time.

Great. Thank you.

Please standby for our next question. Our next question comes from the line of Michael Ciarmoli with Truist Securities. Your line is open.

Hey, good afternoon, guys. Thanks for taking the questions.

Hey, Michael.

John or Sean I just want to make sure. It sounded like the top line missed versus your expectation. I think you were looking at '22 about higher USM. So I wanted to make sure I had that. And then just I mean on the engine maintenance deferrals I mean should we be thinking of that as something maybe a little bit more ominous when we couple that with what we're seeing out of the airlines. And I think there's always been some chatter and reports of some of these advanced bookings, especially in Canada, really showing some weakness. So I'm just thinking you hear an airline defer an engine most likely because they're not flying or how can we reconcile that?

Yes. I appreciate that. You got a little garbled there at the beginning, but I think I got it. So in terms of the top-line, yes, the sales out of the USM business were below our expectations for the quarter. Specifically that was a couple of customers on one contract and I would not cite that as ominous or an indication of overall trend. As a matter of fact, our understanding is the reason we deferred maintenance is because they actually needed the lift as opposed to had the ability to take the engines out of service and put them through the shop. So it would suggest that there's continued strong demand there.

Okay. That's helpful. And then just what about the sort of more questions on USM I guess. We've actually seen some of the US carriers maybe talking about accelerating some retirements, which maybe that's just a healthy return to normal in terms of retirement as a percent of fleet. Are you seeing those signals? Didn't you get access to that material? I mean some of these customers, some of the carriers have said that are some of your customers. So do you think there's going to be, I don't want to say a bow wave of USM, but do you think you get some more shots on goal here?

Yes. I mean so we're in a lot of these conversations as you can imagine. The bow wave has been predicted for some time and it hasn't happened in that form. But as we mentioned, generally speaking, we are seeing more of those conversations and more whole assets and parts packages come to market. But it's still not a normal amount. But as we have said for that business, when you reach a point where you start to get a more regular level of material hitting the market, combined with the elevated demand that we expect to persist for some time, that would be a good combination of events for us for USM. But again our focus and our investments at the company have really been in the other areas around component repair, which obviously is very high margin. And certainly the new parts Distribution business, which we've highlighted has been growing exceptionally well over the past 13 quarters and we see a lot of run rate for that business, which is more predictable over the next several years.

Got it. Helpful. And then just last one housekeeping. What was the organic growth? I may have missed it, the organic growth in the quarter, Sean?

Yes. For the quarter, it was 6% organic growth.

Got it. All right. Thanks, guys. I'll jump back in the queue.

Thank you.

Ladies and gentlemen, at this time, I would now like to turn the call back over to management for closing remarks.

Great. Thank you, everybody. We really appreciate the time and the interest and we look forward to being back with you in July.

Ladies and gentlemen that concludes today's conference call. Thank you for your participation. You may now disconnect.