Hello, and welcome to today's conference call to discuss Algoma Steel's Fiscal First Quarter 2024 Financial Results. My name is Doug and I'll be your operator for today's call. At this time, I'd like to hand the call over to Mike Moraca, Treasurer and Investor Relations Officer for Algoma. Mr. Moraca, please go ahead.

Good morning, everyone, and welcome to Algoma Steel Group Inc's first quarter fiscal 2024 earnings conference call. Leading today's call are Michael Garcia, our Chief Executive Officer; and Rajat Marwah, our Chief Financial Officer. As a reminder, this call is being recorded and will be made available for replay later today in the Investors section of Algoma Steel's corporate website at www.algoma.com. I would like to remind you that comments made on today's call may contain forward-looking statements within the meaning of applicable securities laws, which involve assumptions and inherent risks and uncertainties. Actual results may differ materially from statements made today. In addition, our financial statements are prepared in accordance with IFRS, which differs from U.S.GAAP and our discussion today includes references to certain non-IFRS financial measures. Last evening, we posted an earnings presentation to accompany today's prepared remarks. The slides for today's call can be found in the Investors section of our corporate website. With that in mind, I would ask everyone on today's call to read the legal disclaimers on Slide 2 of the accompanying earnings presentation and also refer to the risks and assumptions outlined in Algoma Steel's First Quarter Fiscal 2024 Management's Discussion and Analysis. Please note that our financial statements are prepared using the U.S. dollar as our functional currency, and the Canadian dollar as our presentation currency. Our fiscal year runs from April 1 to March 31 and our financial statements have been prepared for the three months ended June 30, 2023. Please note all amounts referred to on today's call are in Canadian dollars unless otherwise noted. Following our prepared remarks, we will conduct a question-and-answer session. I will now turn the call over to our Chief Executive Officer, Michael Garcia.

Thank you, Mike. Good morning and thank you for joining us to discuss our fiscal first quarter results. As always, I will begin my remarks by addressing what truly matters most to us. The safety and well-being of everyone at Algoma Steel. During our last quarterly call, we updated you on the tragic fatality of a contract worker at Algoma Steel on June 15, the Ministry of Labor was notified and attended the site to conduct its investigation, which remains ongoing. At Algoma, we believe in safety without compromise, and while our continued dedication has led to a significant improvement in our lost-time injury frequency rate over the past decade, we remain committed to creating a safe zero-injury workplace. Next, I'll cover the key events and milestones during our fiscal first quarter, and subsequent to its end, as well as an update on the progress at our EAF project. I will then turn the call over to Rajat for a deeper dive into the numbers and a discussion of our strong liquidity and balance sheet, before closing with an update on market conditions. Our results for fiscal first quarter of 2024 came in modestly ahead of our previously disclosed guidance for both shipments and adjusted EBITDA. Our shipments of 569,000 tons were up 5.9%, versus the prior year period. Our results reflect a quarter of solid operational execution, even in the face of commodity price volatility and we expect that momentum to continue throughout the fiscal year as we work in parallel to advance the investment and activity at our EAF project. On our last call, we provided an update on the progress of Phase 2 of our plate mill modernization project, including the in-line shear installation, which is progressing ahead of schedule. I am pleased to report that the…

Thanks, Mike. Good morning and thank you all for joining the call. I'll remind you again that all numbers are expressed in Canadian dollars unless otherwise noted. As Mike said, we had a solid quarter to start the fiscal year. Our first quarter results included adjusted EBITDA of CAD191.2 million or CAD336 per ton, which reflected an adjusted EBITDA margin of 23.1%. Cash generated from operating activity was CAD163.9 million, we finished the quarter with CAD300.6 million of unrestricted cash and our USD300 million revolving credit facility remains undrawn, representing total liquidity in excess of CAD600 million. As a reminder, the only remaining long-term debt on our balance sheet is in the form of government loans linked to our capital projects and those loans have highly attractive terms that include the potential for partial forgiveness of principal, as we reach certain carbon emission reduction targets with the shift to EAF steel-making in the coming years. I will now dive into the key drivers of our performance in the quarter. We shipped 569,000 tons in the quarter, up 5.9% as compared to the prior year period. Our plate and strip production continues to run well, and despite normal seasonal maintenance in the second half of the year, including our annual vessel reline, we expect our shipment in each of the next two quarters to be roughly in-line with our typical run rate achieved over the last several quarters. Net sales realization averaged CAD1,323 per ton, down 18.9% versus the prior year period. The decrease versus the prior-year level, primarily reflects overall softer market conditions. Plate ricing continued to enjoy a significant premium relative to hot-rolled coil during the quarter, driven by resilient demand particularly from spending on infrastructure projects and durable goods. As a reminder, we are the only discrete plate…

Thank you, Rajat. Looking at the state of the North American steel market, pricing levels in the fiscal first quarter saw periods of volatility with index pricing for U.S. Midwest hot-rolled coil ranging from approximately CAD850 to CAD1,200 per ton. Subsequent to the quarter end prices have continued to decline to current levels in the low CAD800s. Plate pricing continues to demonstrate a significant premium as overall demand for plate products remains high, which in turn continues to benefit our average price realizations. While the steel business involves inherent volatility, we address that volatility by serving a diverse customer base that provides selling opportunities across Canada and the US. We traditionally service roughly 150 customers in a calendar year and target a high percentage of contract sales. Those contracted volume commitments continued to provide stability to our order book and operations. And the lagging price mechanics help to smooth some of the volatility experienced when prices shift up or down quickly. While the forward curve show some expectation of stability at prices modestly lower than current spot, we've seen time again how quickly things can change. Regardless of the swings in our end markets, we will relentlessly maintain our primary focus of delivering prudent financial discipline and operational excellence. This will ensure our ability to execute our EAF project, ushering in the next phase of our company that defines the future of Algoma, provides the foundation for long-term value creation for our stakeholders and solidifies our leadership position at the forefront of green steel production in North America. Thank you very much for your continued interest in Algoma Steel. We are off to a solid start of our fiscal year and look forward to the rest of what promises to be a transformational year. At this point, we'd be happy to take your questions. Operator, please give the instructions for the Q&A session.

[Operator Instructions] Our first question comes from the line of Katja Jancic with BMO Capital Markets. Please proceed with your question.

Hi. Thank you for taking my questions. Maybe just as a clarification, did you say that the volumes or shipments are expected to be similar in the next few quarters to the first quarter?

Yes, so it's - it'll be similar, not exactly to the first quarter, but if you look at the last several quarters, it'll be an average of that, so similar but not same.

And what about with plate expected to increase, is that still the expectation to raise volumes?

Yes, Katja this is Mike. So shear is in and where we are currently conducting cold commissioning followed by hot commissioning. So by the end of this calendar year, we should start to see a 10% to 15% increase in plate volume. Now, that assuming we've done the work on the commercial side and we have the orders, and so some of that will be reflected in plate shipments, some of it will be used to build inventory ahead of the outage next April. But the total increase will be in the 10% to 15% by this November-December timeframe.

Is this a bit of delay, I thought that was expected by third quarter calendar year?

No, I think it's consistent with what we spoke about in our last call. Rajat?

Yes, it was third fiscal quarter what we mentioned.

Okay. And then maybe just on the cost side, how should we think about cost in the next few quarters?

So cost will be pretty similar to what we are seeing right now. There should be some reductions coming as we keep increasing our production on the coke batteries, our internal coke and start replacing it with purchased coke, but that probably will come towards the end of the fiscal year. But for the next, let's say, one or two quarters our cost should be pretty similar.

Okay. Thank you so much.

Thank you.

Our next question comes from the line of David Ocampo with Cormark Securities. Please proceed with your question.

Thanks. I just wanted to follow-up on the last line of questions regarding costs. I think - I seem to remember that a portion of it is tied to HRC prices or some sort of index type of steel, as well as the IODEX for iron ore. I just would have thought that would - with steel prices coming down at least in the next quarter or maybe next two quarters, but your input costs would also follow that. So, maybe you could help reframe how we should be thinking about cost in the following steel price environment?

Sure. So you're right, there is a portion of our contract that is linked to pricing and it has certain bands. So within a price range it moves and then it stops. So - and the other portion is based on IODEX. So with this - with the price drop in IODEX, remaining same or increasing it, it more or less offsets each other for the quarter or for the coming period. So that's how iron ore will play. Scrap definitely will help because scrap is coming down, and we expect other commodities - commodity price, if they come down, if price remains at lower level in the following quarters, we should see some reduction coming, some slight reduction coming. But it totally depends on how the commodities plays out in the next couple of quarters. But it should change slightly, but that's why I said it's very similar. Our cost quarter-over-quarter and for the next one or two quarters and then we will see some reductions coming just because of coke, as well as coal negotiations that will happen and it will start impacting in the next year. Does that give you some color.

Yes. That's helpful there. And I guess if I think about your breakeven cost structure, just given that framework that you laid out there, are you guys now closer to CAD700 a ton of breakeven on sheet prices?

Yes, it should be in that - you're closer to that vicinity, may be slightly lower, but that's where it is - as we see the cost now.

Got it. Okay. And then a last one from me. One of your competitors here in Canada called out some customers deferring shipments just given the uncertainty that they're seeing in the marketplace, whether that's related to auto or not, you guys do have 130% exposure automotive. So are you guys, starting to see more of that from your customers or are there may be some pushback on taking delivery?

Hi David. Not really, we don't have any large customer sector, where we're experiencing that.

Okay, that's it from me. I'll hop back in the queue.

Our next question comes from the line of Ahmad Shaath with Beacon Securities. Please proceed with your question.

Hi, guys. Most of my questions have been answered, but maybe back on the cost structure. So is it fair to say that we should expect maybe some downward pressure on unit margins per ton, but not a lot, given the comments that I've heard from both the cost and the pricing side?

Yes. There will be downward pressure, specifically from the pricing side. As you've seen that the price has from peak to low by CAD400 and the market is at CAD800, but frankly it's - CRU is at CAD800, but the market is lower. So there is definitely pressure from margins coming from the pricing side, which will impact the quarter. Now, our plate book is good and the plate pricing is good, which offset it as well as, as well as the contract position that we have helps us to maintain a decent margin for this quarter. And then it's - from forward perspective, it depends on how the pricing - how the pricing shapes up.

Got it, that's very helpful. Maybe back on your commentary on the volume side. If I look at the last several quarters, the range is pretty wide. It is pretty wide, I mean we're looking at from 430 to 570 tons. If you look at the last several quarters, so are you - will you be able to give us maybe a little more color on expected volume, is it just the last two quarters? Because if I go back to Q2, Q1 last fiscal year, the volumes were - obviously it was operational issues with the volume was down?

Yes, Ahmad. I think it's a good point. Just take the outliers quarters, there were couple of quarters, which were - which are outliers. So take them out and then you average out, you should come to a good number.

Fair enough. That's great color. I appreciate it guys, will jump back in the queue.

Okay.

[Operator Instructions] Our next question comes from the line of Lucas Pipes with B. Riley. Please proceed with your question.

Thank you very much, operator. Good morning, everyone. Thank you for taking my questions. My first question is, Rajat, I think you made some important comments regarding cash flow in the second half of the year in your prepared remarks, and I just wanted to make sure I fully understood those. So if you could maybe go back and just highlight your cash flow expectations for the second half of the year? I would really appreciate it. Thank you.

Sure. So I did not specifically provide any guidance on the cash flow for the second half, but what I did say was that based on the cash that we have and I was talking about electric arc furnace funding, so based on the cash that we have on hand, the SIF loan that is yet to be received in cash of CAD135 million and also the important factor, which is a drawdown of our inventories, that is roughly CAD150 million of drawdown that we are expecting over the next several quarters, that will be enough to manage the spending - the remaining spending on the EAF project without even considering the operational cash flow that we will generate during that period. So that's what I commented on, which gives us enough liquidity to manage the EAF project.

That is very helpful and congratulations on that.

Thanks, Lucas.

My second question is regarding coal procurement and it's a two-pronged question. The first is, how do you think about coal procurement in light of new EAF transition over the next few years? And then secondly, some of your North American peers have noted expectations for significantly lower coal prices in 2024, so I wondered if you could comment on that? Thank you very much.

Sure. So I'll start with the second question. So the expectation is the same that the coal pricing should drop for next year. When you look at what's happening in the market we've seen a drop of 10% to 20% year-over-year from index perspective and we are expecting that the coal price should come down. Our negotiations will start soon and then we'll finalize for the following year. As far as the buy is concerned and the period of the buy, we've laid out a transition plan where we do the commissioning end of next year and then have a ramp up over a 12-month period, during which we will continue making steels for both the routes and then we - based on the availability of power and stability of our furnaces and availability of prime scrap, we will be running our blast furnace, which means coke battery as well for a little longer while we are transitioning through and then ramping it down. So we will be running our batteries and the blast furnace for next couple of years and the coal contracts are normally annual. So we will be renewing them carefully as we go along, but our first intention is that we want to exclude the purchased coke that we do right now and be self-sufficient on our coke production during the interim period and then start ramping it down.

That's very helpful. I really appreciate the color. I'll try to squeeze one last one in. On the end markets can you maybe run down where you're seeing strength - persistent strength, where you're seeing more pockets of weakness, would really appreciate your perspective on the demand side? Thank you very much.

Sure. I think before I go into any specific markets, on demand, we're roughly four weeks out in our order book on sheet a little longer five to six weeks in plate. Year-to-date the auto build rates have - been tracking as expected and our positive. Obviously, there is a lot of potential uncertainty with the OEM contract negotiations that are taking place and a September 14 expiration date of the current contract, it's probably a little bit too involved to try to predict the all of the knock-on effects on our order book from a potential labor disruption, but obviously a lot of steel is going into automotive. So if you have an industry slowdown, that's going to have some effects. On the distribution side of our business, we see the majority of our customers continue to buy, mostly when they have back-to-back needs of sales. So they're looking and they continue to manage their inventories closely, they've been doing that and that's the behavior we've seen for a while now. The coil market, although we continue to fill our coil order book, you can probably tell from the way that coil pricing has moved over the last several weeks that we still see a little slowness there, although our order book is still full, but that's mostly driven by distribution. Our markets around infrastructure build, where we send a lot of plate continue to be pretty, pretty firm and we see that in our plate demand and in our plate order book and obviously in the plate pricing. So that's kind of the some of the landscape that we're seeing on the commercial side, Lucas.

Michael, really appreciate the color. To you and the team, continued best of luck.

Thank you.

Thank you.

There are no further questions in the queue. I'd like to hand the call back to management for closing remarks.

Thank you again for your participation in our first quarter fiscal 2024 earnings conference call and your continued interest in Algoma Steel. We certainly look forward to updating you on our results and progress when we report our fiscal second quarter results scheduled for November. Thank you very much.

Ladies and gentlemen, this does conclude today's teleconference. Thank you for your participation. You may disconnect your lines at this time and have a wonderful day.